How do you change the rear wiper blade on a Volvo v70?

How do you change the rear wiper blade on a Volvo v70?

Replacing the rear wiper blade

1. Fold the wiper arm outwards.
2. Angle the wiper blade slightly out from the wiper arm.
3. Grip around the wiper arm and using a thumb, press the blade forward (at the arrow) to loosen and remove the blade.
4. Press the new wiper blade into place.
5. Fold the wiper arm back down.

How do you change the rear wiper blade on a Volvo xc70?

Replacing the wiper blade, rear window

1. Lift the wiper arm from the window and pull the lower section of the blade to the right.
2. Grip the centre of the wiper arm and lift it from the windscreen to lock position.
3. Grip the lower part of the blade and pull to the right until the blade loosens from the arm.

How do you change the rear wiper blade on a Volvo v40?

Replacing the wiper blades, rear window

1. Grip the inner section of the blade (by the arrow).
2. Turn anticlockwise to use the blade’s end position against the wiper arm as a lever to detach the blade more easily.
3. Press the new wiper blade into position.
4. Move the wiper arm back to its original position.

How do you put a Volvo wiper blade in service position?

Press the ignition button again briefly to switch the ignition off. Within 3 seconds, move the right steering wheel lever up and hold it for at least 1 second and the wipers will then move to the service position on the windshield.

How do you lift a Volvo wiper blade?

Press the Wiper Service Position button. The light indicator in the button illuminates when the service position is activated. Upon activation, the wipers move to standing straight up. To deactivate the service mode, press Wiper Service Position again.

How do you put windshield wipers on a Volvo?

Press and hold the lock button on the wiper blade attachment. While holding the button down, pull the blade straight out, parallel with the wiper arm. Slide in the new wiper blade until it clicks into place. Fold the blade back toward the arm until it clicks into place.

Is the rear wiper on my Volvo P2 working?

Help, Advice, Owners’ Discussion and DIY Tutorials on Volvo’s stylish, distinctive P2 platform cars sold as model years 2001-2007 (North American market year designations). On my 2006 V70, the rear wiper stopped working. I got a new motor and that did not work. The fuse is OK. The original motor works when I apply power directly to it.

What to do if rear wiper is not working?

First, You need to check fuse №19 in your Rear module. If it good and there is power on it, you need to check wire between F connector and motor. (contacts 1 and 6 – white and yellow wires). If fuse, power and wire are good, you need to repair or replace your REM.

Where is the relay on a Volvo V70?

If you can find the Volvo V70 electrical pdf, I can direct you to the relay. Unfortunately, I have a hardcopy but not the pdf. The relay can be found on page 138, diagram 2/72. From the top of the relay panel, it’s the 2nd to the left (square box).

Where is the REM on a Volvo P2?

There is a fuse panel with REM or ‘rear stuff’ behind the trim plate on the left rear panel on your P2. It looks like its controlled by the REM , not a relay. First, You need to check fuse №19 in your Rear module. If it good and there is power on it, you need to check wire between F connector and motor. (contacts 1 and 6 – white and yellow wires).