How do you change the headlights on a Saturn Ion?
Turn your low beam headlights on. They should shine on the wall. Mark the center of each headlight on the wall with masking tape. You may want to wait until dusk or darken the room to improve visibility. Move your Saturn Ion back three car lengths from the wall.
Where is the headlamp relay located on a car?
The headlight relay is located in the left instrument panel fuse block, on the left side of the instrument panel, and the daytime running lights relay is located in the underhood compartment fuse block, which is located in the engine compartment.
What should I do if my headlight relay fails?
They’re generally pretty reliable, but will eventually fail with time and use. Turn on your lights. If only one light comes on, the relay is OK and you probably have a bad headlight. The relay operates both headlights. Open the hood, locate the fuse box with the headlight relay or relays, and open it. Put your ear close to the relay and listen.
What to do if only one headlight comes on?
If only one light comes on, the relay is OK and you probably have a bad headlight. The relay operates both headlights. Open the hood, locate the fuse box with the headlight relay or relays, and open it. Put your ear close to the relay and listen.
Where are the fuses located on a Saturn Ion?
The instrument panel fuse block is located behind the panel on the driver’s side of the central console. Loosen the screw on the cover and remove the cover. It is located in the engine compartment (left-side), under the cover. How to check the fuses?
Where are the vertical adjustment screws on a Saturn Ion?
Move your Saturn Ion back three car lengths from the wall. It should be about 25 feet from the wall. Determine where your vertical adjustment screws are. The Saturn Ion does not have a horizontal adjustment.
What’s the best way to Park a Saturn Ion?
Adjusting the angle can improve your nighttime visibility and maintain compliance with state regulations regarding the allowed angle. Park your Saturn Ion about 5 feet from a wall. Saturn recommends you use a wall that’s 6 feet high by 12 feet long and has a white matte finish. Make sure you park on a level surface.
Where are the headlights on a Saturn Ion?
Determine where your vertical adjustment screws are. The Saturn Ion does not have a horizontal adjustment. The screws for sealed beam units should be on the headlight assembly under the hood. Composite headlights bolted to an adjuster plate typically have the adjustment screws on the headlamp module. Twist the adjustment screws with a screwdriver.
Move your Saturn Ion back three car lengths from the wall. It should be about 25 feet from the wall. Determine where your vertical adjustment screws are. The Saturn Ion does not have a horizontal adjustment.
Adjusting the angle can improve your nighttime visibility and maintain compliance with state regulations regarding the allowed angle. Park your Saturn Ion about 5 feet from a wall. Saturn recommends you use a wall that’s 6 feet high by 12 feet long and has a white matte finish. Make sure you park on a level surface.