How do you change fuel pump from EFI to CARB?
There are two ways to do this. The first is installing a 3 port, return style AFPR inline before the carb. The second is to install a carb fuel pump. Both options will work, and cost about the same.
How to change ignition module in Camaro Firebird?
It needs to be complete with the Firebird or Camaro ignition module, wiring harness, cap, rotor, and coil. Drop it in the engine, being sure to get it on the same tooth as your old distributor. The old coil has 2 wires going to it, you will need to connect these wires to the connectors on the new coil.
How to change fuel delivery line from afpr to CARB?
Go to your local hardware store and buy some 3/8″ pipe thread to 3/8″ hose nipple fittings, and put one in each port of the AFPR with a good coat of thread sealant. Plumb a hose from the fuel delivery line to the suitable port on the AFPR, and do the same with the return. Finally, run a line from the pressure port on the AFPR to the carb.
How old is the fuel pump in a classic car?
This is one of the more common fuel pump problems found in classic cars that are between 30 and 60 years old. Another common place for a fuel leak to develop is in the rubber hose and metal tube that leads from the tank to the fuel pump.
What should the torque be on a fuel pump?
The fuel pump bolt torque specification is usually around 25 to 35 foot-pounds. Regardless of the model of the fuel pump, the best way to ensure the bolt is tightened properly is to use a torque wrench. To make sure the bolt stays in place, apply a small amount of thread-locking compound before reassembly.
How many ounces of gas does a mechanical fuel pump push?
If the mechanical pump is working correctly, it will push four to six ounces of gas into the bottle. Most mechanical fuel pumps have a weep hole on the bottom of the unit.
When to replace the seal on the fuel pump?
When this happens, oil can seep out around the fuel pump. If you notice a leak in this area, replace the seal as soon as possible, as detergents in the engine oil can cause further damage. There are several best practices to follow when replacing the fuel pump or the sealing gasket.