How do you adjust the headlights on a Toyota cruiser?
Turn the headlights on. Use the horizontal screw located on the inside edge of the housing (toward the center of the Cruiser) and the vertical adjustment screw located on the top of the headlight housing to adjust the headlight beam until the beam is centered on the “+” on the wall.
Where is the adjustment screw on a Toyota cruiser?
Use the horizontal screw located on the inside edge of the housing (toward the center of the Cruiser) and the vertical adjustment screw located on the top of the headlight housing to adjust the headlight beam until the beam is centered on the “+” on the wall.
Where do I find the instructions for adjusting my headlights?
For my ’17, instructions for headlight aiming (both vertical and horizontal) are on pages 485-485 of the owner’s manual, including drawings of where the adjustment screws are. I’m about to do it myself, since the airbags have caused my headlights to be way too low.
What’s the best way to fix a Toyota Land Cruiser?
Make sure the vehicle has a full tank of gasoline and the area around the headlight is not deformed. Park the vehicle on level ground. Sit in the driver’s seat. Bounce the vehicle several times. Using a Phillips-head screwdriver, turn bolt A in either direction. Remember the turning direction and the number of turns.
Turn the headlights on. Use the horizontal screw located on the inside edge of the housing (toward the center of the Cruiser) and the vertical adjustment screw located on the top of the headlight housing to adjust the headlight beam until the beam is centered on the “+” on the wall.
Use the horizontal screw located on the inside edge of the housing (toward the center of the Cruiser) and the vertical adjustment screw located on the top of the headlight housing to adjust the headlight beam until the beam is centered on the “+” on the wall.
How do you adjust head lamps on a landcruiser?
Measure and record the distance from the floor to the center of the head lamp. Place a strip of tape across the wall at this same height. Place strips of tape on the wall, perpendicular to the first measurement, indicating the vehicle centerline and the centerline of both head lamps.
How to adjust the headlight and taillight?
HINT: The H RH and H LH line is 0.4 below the horizontal line (H line) of the light axis. Start the engine. Turn the headlights ON. Check that the headlights properly strike the position shown in the illustration. If not, adjust the lights in the vertical direction.