How do I start driving my car when it is in remote start mode?
Once in the vehicle, insert your key fob into the wireless ignition node (WINR), and turn to the ON/RUN setting (you don’t need to turn all the way to START, since your vehicle is already started). Your car will now operate as it normally would.
Why doesn’t my truck turn on when I turn the key?
If you turn the key and can hear the starter motor trying to turn the engine over, the lack of power is likely caused by electrical issues such as a weak battery, dirty battery terminals or a worn starter motor. If you’re still not having any joy, it may be a problem with the battery terminals.
Do you put key in after remote start?
Yes, even after the car remote starts, you will need to put the key to drive the car off (and also to unlock the ignition lock on the steering column, as well as to put the gear into drive for an automatic transmission car).
What do you do when your car wont start with the key?
When you went out to your vehicle, you unlocked the doors and got in. You inserted the key in the ignition and thought you turned it to the “on” position, but you did not. You then put your foot on the brake and took the vehicle out of park.
What happens when the car is in Run mode?
During the start mode the ignition module allows full battery voltage to the seconday ignition system to make sure there’s a hot enough spark to start a cold engine. In the run mode the ignition module steps the voltage down to the secondary ignition system. If this isn’t done the higher voltage will damage secondary ignition system components.
Do you need a key fob to start a car?
For added insurance, some designs require you to flick or rotate a switch before pressing the start button. And in most cases, the key fob must be inside the vehicle in order to get the motor running.
What’s the difference between run and start mode?
These are the start mode and the run mode. During the start mode the ignition module allows full battery voltage to the seconday ignition system to make sure there’s a hot enough spark to start a cold engine. In the run mode the ignition module steps the voltage down to the secondary ignition system.