How do I setup my new Juniper router?

How do I setup my new Juniper router?

To configure the software:

1. Verify that the router is powered on.
2. Log in as the “root” user. There is no password.
3. Start the CLI.
4. Enter configuration mode.
5. Configure the name of the router.
6. Create a management console user account.
7. Set the user account class to super-user.
8. Configure the router’s domain name.

How do I set up juniper?

Configuring Junos OS for the First Time on a Device with a Single Routing Engine

1. Connect to the device through the console port.
2. Power on the device and wait for it to boot.
3. Log in as the user root .
4. Start the Junos OS command-line interface (CLI):
5. Enter Junos OS configuration mode:
6. Configure the hostname of the device.

How do I reset my juniper srx220?

By default, pressing and holding the RESET CONFIG button for 15 seconds or more—until the Status LED is solid amber — deletes all configurations on the device, including the backup configurations and rescue configuration, and loads and commits the factory configuration.

How do I set my juniper username and password?

To create a new admin user with super-user privileges:

1. Select Configure>System Properties>User Management.
2. Click Edit.
3. In the Edit User Management dialog box, click Add.
4. In the User name box, type the username of the user (for example, jlee).
5. In the Password box, type the password for the user.

How do you set up a new Juniper switch?

To configure the switch:

1. Connect the console port to a laptop or PC using the RJ-45 to DB-9 serial port adapter.
2. At the prompt type ezsetup.
3. Enter the hostname.
4. Enter the root password.
5. Enter yes to enable services like telnet and SSH.
6. Next, select one of the switch management options:

How do I get into Juniper config mode?

To switch between operational mode and configuration mode:

1. When you log in to the device and type the cli command and press Enter, you are automatically in operational mode:
2. To enter configuration mode, type the configure command or the edit command in CLI operational mode.

How do I enable Juniper interface?

Enable/Disable Interface in Juniper

1. root@Juniper# set interfaces ge-0/0/1.0 disable << This is cisco equivalent of “shutdown” – To Juniper enable interface:
2. root@Juniper# delete interfaces ge-0/0/1.0 disable << This is cisco equivalent of “no shutdown” Verification:
3. root@Juniper#show ge-0/0/1.0.

How do I reset my juniper srx300 to factory settings?

How do I reset my juniper switch to factory settings?

Reverting to the Default Factory Configuration by Using the Menu Button

1. Press the Menu button until you see MAINTENANCE MENU on the panel.
2. Press the Enter button.
3. Press Menu until you see FACTORY DEFAULT.
4. Press Enter. The display says RESTORE DEFAULT?
5. Press Enter.

What is Juniper default password?

Change or modify – The default password (abc123) is used during initial configuration, after installation.

How do I set root authentication?

Configure a Plain-Text Password for User Root Type the set command for the plain-text password and press Enter. [edit] user@host# set system root-authentication plain-text-password New password: Type the new password next to the New password prompt and press Enter.