How do I reset the maintenance message on my S550?
Press and hold the “OK” button on the left side of the steering wheel. Release the buttons when the maintenance messages screen appears on the display. Press the up or down arrow button until “Reset” is highlighted. Press the “OK” button to reset.
Where does the error message come from on a Mercedes?
If there is something wrong with the device you are trying to operate, you will likely then get a warning, delivered through the SAM to the CAN (Controller Area Network) bus. The CAN bus will send the error message to the “error screen” you mentioned (the Multifunction Display, beneath your speedometer), or elsewhere in the instrument cluster.
When to reset the maintenance message on a Mercedes Benz?
Certain maintenance messages automatically reset after receiving information from sensors in the vehicle that the service has been performed. Some messages need to be manually reset after the service is complete. Mercedes-Benz dealers should reset the indicator if they perform the service.
Why is my SAM module not working in my car?
Getting those connections wet due to water intrusion can also cause problems in equipment routed through the SAMs. And, the SAM under the back seat seems particularly affected when significant amounts of water intrude into the car. Your car has three CAN busses.
How to reset a Mercedes-Benz S550 maintenance message?
Press and hold the “OK” button on the left side of the steering wheel. Release the buttons when the maintenance messages screen appears on the display. Press the up or down arrow button until “Reset” is highlighted. Press the “OK” button to reset. “2010 Mercedes-Benz S-Class Operator’s Manual”; Mercedes-Benz USA, LLC; 2009
When does the Mercedes Benz SOS malfunction warning come on?
If you don’t have access to the Star Diagnostic Tool you can have your Mercedes Benz dealer perform DTB P-B-82.95/636a, 03/24/2009 Supersedes: P-B-82.95/636 dated Oct. 29, 2008 “Instrument Cluster Message – “SOS TeleAid not Activated”” SRS Airbag Defective Warning could be triggered when the TELE AID malfunction is displayed.
How do you reset the service indicator on a Mercedes Benz?
Mercedes-Benz dealers should reset the indicator if they perform the service. If you service the car yourself, reset the indicator on the control panel. Insert the key into the ignition. Turn the ignition to position 1. Press and hold the arrow button on the right side of the steering wheel.
How to clear the TeleAid SOS warning Mercedes Benz?
For this reason we have included instruction on how to clear the Teleaid SOS warning with the STAR Diagnostic tool. In case you are wondering, Star Diagnostic is the scanner that the dealer uses to troubleshoot any system in your car and it is specific to Mercedes Benz cars.
Mercedes-Benz dealers should reset the indicator if they perform the service. If you service the car yourself, reset the indicator on the control panel. Insert the key into the ignition. Turn the ignition to position 1. Press and hold the arrow button on the right side of the steering wheel.
How to reset service Minder light on Mercedes-Benz GL Class?
Follow the instructions below to reset the Service Minder light on your Mercedes-Benz GL-Class: If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal. Make sure the VEHICLE TRIP MILAGE is displayed in the multi-function display. Remember!
How long does it take to reset service light?
With the facelift at the end of 2015, some engines are experiencing an increase in performance. Time needed: 7 minutes. When maintenance service is due, the Service due minder will appear on the display. The service interval must be reset after performed the maintenance service on your vehicle.
How to reset Mercedes A and B service indicator?
How to reset A and B service indicator for Mercedes C300. Press and HOLD Answer Call+OK button on the steering wheel until the hidden menu appear, When the menu appears follow the instructions on the video. Thanks for watching, leave comments or suggestions. Loading…
Follow the instructions below to reset the Service Minder light on your Mercedes-Benz GL-Class: If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal. Make sure the VEHICLE TRIP MILAGE is displayed in the multi-function display. Remember!
With the facelift at the end of 2015, some engines are experiencing an increase in performance. Time needed: 7 minutes. When maintenance service is due, the Service due minder will appear on the display. The service interval must be reset after performed the maintenance service on your vehicle.
Press and hold the “OK” button on the left side of the steering wheel. Release the buttons when the maintenance messages screen appears on the display. Press the up or down arrow button until “Reset” is highlighted. Press the “OK” button to reset.
How to reset a Mercedes’s class service?
Mercedes S Class Service A Reset Procedure: 2015. Close all doors, hood, and trunk lid and turn the ignition to position I (ACC) Press HOUSE button located on the left of the steering wheel repeatedly until the menu item TRIP is highlighted in the multi-function display. Press the OK button within 5 seconds.
How to reset ” service B ” on Mercedes C230?
1 Close all doors, hood, and trunk lid and turn the ignition to position II (ON) 2 Press the main menu PAGE buttons repeatedly to display the main trip/temp menu 3 Press the UP and/or DOWN arrows to scroll through the sub-menus to display the FSS (Flexible Service System) menu
Mercedes S Class Service A Reset Procedure: 2015. Close all doors, hood, and trunk lid and turn the ignition to position I (ACC) Press HOUSE button located on the left of the steering wheel repeatedly until the menu item TRIP is highlighted in the multi-function display. Press the OK button within 5 seconds.
How to reset the maintenance light on a BMW?
1. Turn the ignition to run (one position before starting engine). 2. Press the CUSTOMIZE button. 3. Select System Settings using the INFO dial. Press the INFO dial. 4. Select Service Info. Pre… How to reset the maintenance light on 2012-2013 BMW vehicles. 1.
How to reset Mercedes E class service light at home?
To enter reset mode, press and hold the TRIP or DIMMER button (located on the left side of the instrument cluster) until the message “Do You Want To Reset Service Interval?” “Confirm reset Using Reset Button” or “Service Interval To Reset: Press Reset Button for 3 Sec.” is shown in the display, then release the button
How to reset Mercedes class service without using a scan tool?
Mercedes S Class Service A Reset Procedure Without Using a Scan Tool! Press HOUSE button located on the left of the steering wheel repeatedly until the menu item TRIP is highlighted in the multi-function display Press and hold PHONE button and then within 1 second press and hold down the OK button