How do I reset my Maestro RR?
MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will flash RED rapidly (this may take up to 10 seconds).
Do I need iDataLink Maestro RR?
When Do I need the iDataLink Maestro Rr? We recommend this module when you are installing a new in-dash video receiver which has an iDataLink data port built into it. Depending on your car, the new receiver has the compatibility to display iDataLink’s graphic information like performance guages, climate controls, etc.
What does Idatalink Maestro do?
Advanced Programmable Radio Replacement Module. Web-programmable radio replacement interface for integration with factory systems including steering wheel controls, media player, hands-free telephone, voice commands, and satellite radio modules.
How do I program my iDatalink remote start?
START vehicle for 15 seconds. Press and hold the brake pedal. Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)
How does iDatalink Maestro work?
iDatalink’s Maestro ADS-MRR module, along with the correct interface harness for your vehicle, allows you to install a new car stereo in select late-model Fiat, Ford, GM, Chrysler, Toyota/Scion, Honda, Fiat, Subaru, or Volkswagen vehicles while retaining your factory steering wheel audio controls and the use of your …
What is iDatalink used for?
What are iDatalink products used for? iDatalink modules are designed to interface with your vehicle’s factory security and convenience feature control units to facilitate the installation of aftermarket remote starter, alarm and keyless entry systems.
How do I reset my DSR1?
Download and Install DSR1 Firmware (DSRA) Under Step-2 click “Open File” button to select the DSRA file downloaded from website above. Check box to “Reset DSR1 to Factory Settings” (important if problems arise or installing in a different vehicle.) Confirm the update file version number.
What radios are compatible with Maestro?
Maestro RR works with all radios, however only select Alpine, JVC, Kenwood, Pioneer and SONY radios feature the iDatalink-compatible port to enable exclusive radio retention features with Maestro RR.
What does a stereo interface do?
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
How do you reset the Maestro RR module?
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module.
How do I reset the red light on the Maestro?
Reset the RR. The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Where is the data cable on a maestro?
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Where is the red / brown wire on the Maestro?
Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/ BROWN wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended. Reset the RR. The light on the Maestro is blinking RED TWICE.