How do I reset my DD WRT to factory settings?

How do I reset my DD WRT to factory settings?

The following procedure will clear out the NVRAM and set dd-wrt back to default values:

1. With the unit powered on, press and hold the reset button on back of unit for 30 seconds.
2. Without releasing the reset button, unplug the unit and hold reset for another 30 seconds.

How do you reset your router to factory settings?

How to Reset Router From Configuration Page

1. Type your router’s IP address into any web browser’s search field.
2. Enter your username and password when prompted.
3. Go to System or System Tools.
4. Look for Restore or Factory Default.
5. Click Restore or Reset and OK to confirm.
6. Wait for the router to reboot.

How do I setup my Linksys WRT120N as a repeater?

How to Configure a Linksys Wireless Repeater

1. Connect to the wireless network.
2. Click “Wireless,” and then “Basic Settings.” Write down the name of the network (sometimes referred to as the service set identifier).
3. Click “Wireless Security” and then write down the security mode, encryption method, and pre-shared key.

What is the DD-WRT default password?

The default username is root and the default password is admin (from v23 SP1). Some earlier versions of DD-WRT did not require a username.

How do I Reset my Linksys wrt120n to factory default?

There are two ways to reset the Linksys WRT120N to factory defaults. 1. Press and hold the Reset button for approximately 10 seconds, and release it. or 2. Log in to Web Interface, Go to Administration ->Factory Defaults- >Restore All Settings and reset. 1. Press and hold the Reset button for approximately 10 seconds, and release it. or

How do I Reset my router to factory settings?

There are two ways to reset the Router to its factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration > Factory Defaultsscreen of the Router’s browser-based utility. Power The Power port connects to the included power adapter.

Where is the reset button on a Linksys router?

Reset The Reset button is located on the right side of the product label. There are two ways to reset the Router to its factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration > Factory Defaultsscreen of the Router’s browser-based utility.

What to do when your router won’t reset?

If the LED does not turn green, the router has a problem. 1. Turn the power off and back on to see if the router recovers. 2. Press and hold the Restore Factory Settings button to return the router to its factory settings. For more information, see Factory Settings o n page 136.