How do I log into my HP ProCurve switch?
Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.
How do I reset my HP ProCurve password?
press and hold the Clear button (on the front of the switch) for a minimum of one second to clear all password protection. You can also use the Reset button together with the Clear button (Reset+Clear) to restore the factory default configuration for the switch.
How do I reset my HP V1910 password?
HP V1910-48G JE009A Factory reset – Password recovery capability enabled.
- Connect switch cable to COM.
- Open Putty on COM 38400 – 8 – 1 – N.
- Powercycle the switch.
- Press Ctrl-B at boot to enter extended boot menu.
- Skip current system configuration.
- Reboot.
What is the default username and password for HP switch?
The default username for first time configuration is admin, no password is required. Usernames and passwords are case sensitive.
How do I add a user to my HP switch?
The command we use to create a user is called local-user/ Below we create a user called allen, who will be a manager….How to Create A New user on the HP Procurve A Series Switch.
| Visitor | 0 | Basic commands such as telnet,ping and traceroute. This user cannot save the configuration of the switch |
|---|---|---|
| Manager | 3 | Can run all commands and browse the file system of the switch |
What is the default password for HP printer admin?
Open a web browser and type the printer IP address in the address field exactly as it appears on the Configuration Page, and then press Enter. Click the Security tab, and under General Security, set the local administrator password. Keep the username default as admin. Type the New Password and Verify Password.
How do I factory reset my HP switch 1920?
To execute the factory default reset on the switch, perform these steps:
- Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
- Continue to press the Reset button until the Fault LED light begins to flash.
- Release the Reset button.