How do I know if my sway bar link is broken?
These are the most common signs of a failing sway bar link:
- Popping or knocking noise: A popping or knocking noise from the area when you go over bumps is the most common sign of a faulty sway bar link.
- Reduced handling: A broken sway bar link means the sway bar is no longer attached to the vehicle.
How do you remove a sway bar link?
Depending on the make and model of your car, you may have only front sway bars links, or front and rear sway bar links. Step 7: Remove the lug nuts. Two lug nuts hold the sway bar link in place. Start by removing the upper nut first. This nut holds the most weight when the sway bar is at normal rest, so it tends to be the most problematic.
What do I need to remove front wheel drive sway bar?
Remove the nuts holding the sway bar link to the bar and control arm. Remove the link. Link removal on some front-wheel-drive cars will require a ¼-inch Allen wrench to keep the bolt from spinning.
What is it and when to replace a sway bar?
Sway Bar / Stabilizer Link – What Is It And When To Replace? Sway bar link, Stabilizer bar, Sway bar, Stabilizer link, Anti-sway bar, Anti-Roll bar or some other combination of these words…Just like your friend Robert (Rob, Robbie, Bobby, Bob), this guy can’t get his name straight. Don’t let that throw you off.
Where to place bushing on front sway bar?
Place a bushing, and then a cup, on the lower control arm where the link goes through it and slide the bolt through it. The lip on the bushing faces the lower control arm. Slide the last bushing and cup onto the bolt under the control arm with the lip to the control arm.
Where is the sway bar link on a car?
Step 6: Locate the sway bar link to be replaced. Sway bars are usually located at the front of the car and are bolted to the suspension on your vehicle. Depending on the make and model of your car, you may have only front sway bars links, or front and rear sway bar links. Step 7: Remove the lug nuts. Two lug nuts hold the sway bar link in place.
Remove the nuts holding the sway bar link to the bar and control arm. Remove the link. Link removal on some front-wheel-drive cars will require a ¼-inch Allen wrench to keep the bolt from spinning.
Sway Bar / Stabilizer Link – What Is It And When To Replace? Sway bar link, Stabilizer bar, Sway bar, Stabilizer link, Anti-sway bar, Anti-Roll bar or some other combination of these words…Just like your friend Robert (Rob, Robbie, Bobby, Bob), this guy can’t get his name straight. Don’t let that throw you off.
Is it possible to change more than one sway bar link?
If you are changing more than one sway bar link, simply repeat the steps on the other side. Replacing the sway bar links is a repair process that can be done with a few basic tools. If you don’t have access to the correct tools or are short on time, ask a certified mechanic from YourMechanic to replace the sway bar links for you.