How close to the radiator should the condenser be?
There should be 1/4″ – 3/8″ (no more than 1/2″) between the A/C condenser and the radiator. If there is too much space the air will go around the condenser. The condenser cannot go on the backside of radiator.
Where does the condenser need to be in relation to the radiator?
The condenser should be as close as possible to the radiator. If it’s spaced too far away, the air flow becomes turbulent between the two and the efficiency of the radiator is reduced. Warm air flowing cleanly through the radiator removes more heat than cooler air that’s turbulent.
How do you fit a radiator to the wall?
Make sure you allow for about 125mm (5”) clearance between the bottom of the radiator and the floor. Measure from the base of the bracket to the base of the radiator and then add the 125mm and this will determine where the base of the bracket will be positioned on the wall. Fit your radiator to the wall, then get started on the pipe run.
What do you need to replace a condenser on a car?
These may include the car’s radiator, radiator and condenser fans, grills, headlights, mounting brackets, lock brace, supports and in some cases the bumper. Do not release the condenser from its mounts yet, just remove parts that are in the way.
How do you connect a new central heating system to a radiator?
Additional, use the correct plastic pipecutters to cut the pipe as this will ensure that it’s not crushed out of shape. Join your new pipe run to the radiator valves, and make sure the top blank and bleed valves are in place. You can now refill the central heating system and bleed the radiator.
How do you install radiator to core support?
It’s much easier to install the radiator to core support seals on the bench. We use a 1/4-inch pin punch to line up the seals and then pull back the protective paper and stick it down. The seals were fresh and the tape was working correctly.
How do you install a radiator on a bench?
Install the radiator with the core support on the bench to make sure the seals are installed correctly and doing the proper sealing job. Install the fan shroud first. The shroud will not drop into place in one piece after the core support and radiator are installed.
Can a radiator be removed from an air conditioner?
The air conditioner condenser is often connected to the radiator. To remove the radiator, you will need to remove the condenser mounting bolts with a wrench. This allows the condenser to stay in the engine bay and keeps the refrigerant system closed.
What’s the best way to change a radiator in a car?
Secure the air conditioning condensor. Use the same condenser mounting bolts that your removed from the old radiator. Align the condenser so that the bolts fit into the radiator and screw them in with a wrench or ratchet. Plug in any wiring harnesses. This will restore power to your electric fan (if your car has an electric fan).