How can I Reset my SRS warning light?
It will tell you where the problem is and allow you to reset it once the problem is fixed. Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.
How to reset SRS / airbag light on Mercedes Benz?
Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts. Look at your OBD scan tool and write down the codes it displays. 3. Check your owner’s manual for what the codes mean. 4.
Is there a scanner that reads the SRS light?
Here is a scanner that works with Mercedes-Benz and will rear fault codes and reset the AirBag, ABS and check engine light. Our favorite scanner that for an in-depth Mercedes-Benz troubleshooting is the iCarsoft MB II. Not only does it read the SRS light (Airbag Control Unit) but also every control unit in your Mercedes-Benz.
Is there a SRS light on the dash?
On my W203 C class 2002 C230 Kompressor Coupe, Manual 6 speed, Audio 20 HU, CDC (added – read later, no other Audio or phone Fiber optics installed), with the basic HVAC control head. And a SRS light on the dash & MFD. Short Summary: Great experience. I scanned thru my OBDII port and found all errors.
What does the SRS light mean on a Mercedes Benz?
What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.
How to reset service light on Mercedes E300?
If your vehicle has an ignition button, press the START-STOP ENGINE button twice without touching the brake pedal. Make sure the TRIP and TOTAL DISTANCE millage are displayed in the multi-function display. Remember! Don’t press the buttons simultaneously, the timing is very decisive at this step!
How does the SRS warning system work in a car?
SRS Warning System. The SRS system checks the operation of several components in your car such as: Airbags. Airbag control unit. Crash sensors. Emergency Tensioning Devices. Belt force limiters. Child occupancy sensor in front passenger seat.
It will tell you where the problem is and allow you to reset it once the problem is fixed. Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.
What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.
Why does my Mercedes Benz E300 not start?
Mercedes-Benz E300 Won’t Start Repair Symptoms. The battery is considered dead when there isn’t enough charge to start the engine or run electrical components. If the fuel pump leaks or begins making a lot of noise, get it looked at right away.
If your vehicle has an ignition button, press the START-STOP ENGINE button twice without touching the brake pedal. Make sure the TRIP and TOTAL DISTANCE millage are displayed in the multi-function display. Remember! Don’t press the buttons simultaneously, the timing is very decisive at this step!
Why does the SRS / airbag light stay on?
Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Install a new battery; Reset SRS/ Airbag light.
What causes the SRS warning light to come on?
The SRS computer in your vehicle has a backup battery that enables it to retain its data, even when your vehicle’s power is cut off. A low or drained car battery can cause the SRS backup battery to get too low. When this happens, the warning light will come on.
Why is the SRS warning staying on on a Mercedes Benz?
Why is the SRS warning staying on? Here is a list of some of the most common problems with the SRS system on a Mercedes Benz. Seat Occupancy Senor in the passenger seat. Low voltage in the electrical system. Battery issue or charging. Seat belt latch. Damaged Wire Contacts at the doors. Defective, damaged or loose contact at the impact sensors.
Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Install a new battery; Reset SRS/ Airbag light.
Is there a way to reset the SRS light?
You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.
Where is the SRS light on a Mercedes Benz?
This is located on the lower left side of the control panel on the driver’s side of the car. Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts.
What does it mean when SRS warning light stays on?
SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system. It is very unlikely that your airbags are going to deploy randomly, but the concern is that they may not deploy…
Where is the reset SRS light on a Mercedes Benz?
Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.
Which is the best scanner to reset the SRS light?
Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.
How to read and reset SRS / airbag light?
Battery dying. How to read and reset SRS/ Airbag light? Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it.
Where are the SRS lights on a Mercedes?
There are 3 wires to connect, colour for colour those that exist under the seat Brown, White and Red on the yellow connector. This resets the SRS lights as before on ignition power, without a star reset.
How do you reset SRS on a Mercedes Benz?
Turning the steering wheel fully left and right doesn’t reset SRS – it re calibrates the steering angle sensor. If you disconnect the vehicle battery, you will need to do this if the ESP error light is illuminated. Start the engine and then run the steering through its full left and right range. That will extinguish the ESP light.
Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts. Look at your OBD scan tool and write down the codes it displays. 3. Check your owner’s manual for what the codes mean. 4.
SRS Warning System. The SRS system checks the operation of several components in your car such as: Airbags. Airbag control unit. Crash sensors. Emergency Tensioning Devices. Belt force limiters. Child occupancy sensor in front passenger seat.
Why does my SRS light keep going on?
Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Step 1 Install a new battery; Step 2 Reset SRS/ Airbag light. Instruction on How to Reset the SRS Light on a Mercedes Benz: 1.
Do you need to disconnect seat covers for SRS?
Air bags and Emergency Tensioning Devices (ETD) are designed to function one time only. Once these systems deploy they must NOT be reused. If you work on the SRS system, you should disconnect the battery. Do not use seat covers unless approved by Mercedes-Benz. Seat covers can restrict the proper operation of the airbags integrated into the seats.
What do you need to know about SRS system?
Airbags contain perchlorate material which required special handling. Air bags and Emergency Tensioning Devices (ETD) are designed to function one time only. Once these systems deploy they must NOT be reused. If you work on the SRS system, you should disconnect the battery. Do not use seat covers unless approved by Mercedes-Benz.