How big is the spindle nut on a Honda Civic?
Spindle nut could be 36 mm depending on the your Accord’s model year. Once the spindle nut is off, unfasten the two bolts on the back of the caliper. Unfasten two additional bolts securing the brake line to the knuckle. Remove the caliper assembly, and use a bungee cord or zip ties to hang the caliper.
How do you remove the spindle nut on a Honda Accord?
Use your deep well socket and ratchet to undo the spindle nut. Spindle nut could be 36 mm depending on the your Accord’s model year. Once the spindle nut is off, unfasten the two bolts on the back of the caliper. Unfasten two additional bolts securing the brake line to the knuckle.
Where is the place Jack on a Honda Civic?
Place jack stands under the pinch welds. With the flat head screwdriver, undo the clip on the center of the spindle nut. With the 32 mm deep well socket, loosen the spindle nut by rotating it counterclockwise. This is easier if you position the wrench to push down instead of up.
How do you remove the spindle nut from a place Jack?
Place jack stands under the pinch welds. With the flat head screwdriver, undo the clip on the center of the spindle nut. With the 32 mm deep well socket, loosen the spindle nut by rotating it counterclockwise. This is easier if you position the wrench to push down instead of up. Remove the spindle nut by hand. Figure 2.
How do you replace the pulley on a Honda Civic?
Attach a long breaker bar to the “handle” end of the tool. It should be angled downward against the ground as a brace. Next, attach a 17mm socket to a long extension, and attach it to the crank pulley bolt through the center of the tool. Then, using another large breaker bar, crank on the pulley bolt counterclockwise.
When to use new bolts on Honda Civic?
Manufacturers design bolts and screws to “stretch” when they’re install. That way, the bolt and screw threads firmly attach to the matching threaded hole or nut. This lowers or outright eliminates the risk that the bolt or screw will work itself loose. For the same reason it’s always a good idea to use new bolts when working on the engine.
How do you replace the crankshaft on a Honda Civic?
The first step is to lift the front end of the car. You’ll want to get it as high as possible. Use a two-post lift if that’s an option. If it’s not and you’re doing this in the driveway, just set the car up on jack stands. Remove the passenger’s side wheel.
How do you jack up a Honda Civic?
Use a two-post lift if that’s an option. If it’s not and you’re doing this in the driveway, just set the car up on jack stands. Remove the passenger’s side wheel. The crankshaft pulley is the single, large pulley at the bottom of the engine. Figure 1. Diagram of the jacking points. (Related Article: How to Jack Up Your Civic – Honda-Tech.com)