Does 2013 Nissan Altima need synthetic oil?
According to the 2013 Altima Owner’s Manual, you can use either conventional or synthetic oil in the Altima. Just be sure to use the correct viscosity and only oil that meets Nissan’s quality (certification) requirements.
How to reset oil service light Nissan Altima?
Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode. In the setting mode screen press (circle) button to move to MAINTENANCE. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button.
How to reset oil service light Nissan 350Z?
In the setting mode screen press (circle) button to move to MAINTENANCE. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance. Select RESET and select new time or distance. Repeat step 3 for ENGINE OIL FILTER.
How to reset the engine oil light due now?
From the “ Maintenance ” screen, use the arrow buttons to toggle the selection to “ Service “, then press the “ Enter ” button to enter that screen. From the “ Service ” screen, use the arrow buttons to toggle the selection to “ Reset “. Press “ Enter ” to reset the engine oil light.
What is maintenance mode on a Nissan Altima?
The maintenance mode for Nissan Altima allows you to set alerts for the reminding of maintenance intervals for the following: Turn the ignition to run, one position before starting engine/push START/STOP button once. Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
How to reset Nissan Altima oil and filter light in seconds?
Press the NEXT button until the Maintenance option is highlighted then select the option with the ENTER button Highlight desired field (Engine Oil – Oil Filter – Tire) by pressing the NEXT button and then press the ENTER button to enter field Highlight the Reset option by pressing the NEXT button twice and then press ENTER
How do you do maintenance on a Nissan Altima?
Use the joystick to scroll down to Maintenance and select by pressing ENTER on the joystick *The Vehicle Information Display uses two buttons an ENTER button (looks like two overlapping boxes) and a NEXT button (a single circle/dot)
From the “ Maintenance ” screen, use the arrow buttons to toggle the selection to “ Service “, then press the “ Enter ” button to enter that screen. From the “ Service ” screen, use the arrow buttons to toggle the selection to “ Reset “. Press “ Enter ” to reset the engine oil light.
How do you reset the oil control system?
Press the DOWN ARROW to scroll to MAINTENANCE then press OK BUTTON. Under MAINTENANCE MENU select OIL CONTROL SYSTEM then press ENTER. Then Press OK BUTTON to RESET. Select YES then press OK Button to confirm. You can also reset the OIL and FILTER , TIRE and OTHER MAINTENANCE in the same procedure. After Resetting the maintenance.