Do you need to replace the serpentine belt on a Volvo S60?
Replacing the Serpentine Belt and & Tensioner on a P2 chassis Volvo S60 is an easy job to complete requiring about an hour of your time and a little bit of patience. Typically this repair is required because of two main reasons:
How do you replace a tensioner on a Volvo S60?
Now, route in the new tensioner up through the front passenger wheel well and set it into place. From up top, thread in the top tensioner bolt. Route the new belt onto the pulleys using the method shown in the below video. All other steps are the reverse of the removal steps indicated above.
How do you remove a serpentine belt from a car?
Pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well.
What is the engine code for a Volvo S60?
Auxiliary Serpentine Drive Belt Routing Diagram for Volvo 5 cylinder petrol engines from 2001 to 2006, Volvo S60, S80, V70, XC70 or XC90 with the 2.4D and D5 Diesel engines – engine codes D5244T and D5244T2.
Replacing the Serpentine Belt and & Tensioner on a P2 chassis Volvo S60 is an easy job to complete requiring about an hour of your time and a little bit of patience. Typically this repair is required because of two main reasons:
Now, route in the new tensioner up through the front passenger wheel well and set it into place. From up top, thread in the top tensioner bolt. Route the new belt onto the pulleys using the method shown in the below video. All other steps are the reverse of the removal steps indicated above.
How to check the belts in a Volvo XC60?
Check the Belts: 2010-2017 Volvo XC60 – 2010 Volvo XC60 3.2 3.2L 6 Cyl. See how to check the belts in a 2010 Volvo XC60 3.2 3.2L 6 Cyl.. Worn belts can damage components such as your AC, battery, power steering and cooling system in your 2010 Volvo XC60 3.2 3.2L 6 Cyl. About Us Maintenance Parts & Tools Contact English
When do you replace timing belt on Volvo?
This bulletin contains information relating to the timing belt replacement interval for model year 1999 to model year 2015 Volvo vehicles. Continue on to the next page to see the interval listing base on year, engine and model beginning with model year 2015 and continuing down to model year 1999. Page 2 of 8 2014-01-15
When to replace a broken serpentine engine belt?
Using a gauge to check for belt wear (Image courtesy of tradetrucks.com) Have the belt replaced whenever a related component is replaced (a broken belt is often associated with a damaged or seized pulley on one of the engine accessories).
How does the serpentine belt work on a car?
Most cars today have a single belt, called a serpentine belt. In the past, two or even three belts were used. The serpentine belt connects all the accessories on the engine to the main drive pulley, which is turned by the engine. As the pulley turns, the belt moves.
What are the symptoms of a bad serpentine belt?
Top 7 Bad Serpentine Belt Symptoms. 1 1) No Air Conditioning. A malfunctioning air conditioner can be attributed to a lot of things. Since the serpentine belt keeps the air conditioner 2 2) Squealing Sounds. 3 3) No Power Steering. 4 4) Overheated Engine. 5 5) Visible Cracks on Belt. More items
Where are the teeth on the timing belt?
The teeth on the belt mesh with the crankshaft timing gear and camshaft timing gear. The belt is held tight by a tensioner to ensure the belt doesn’t skip a tooth, or “jump time.” The timing belt may turn an additional gear for the water pump. What are the symptoms related to a bad timing belt?
Auxiliary Serpentine Drive Belt Routing Diagram for Volvo 5 cylinder petrol engines from 2001 to 2006, Volvo S60, S80, V70, XC70 or XC90 with the 2.4D and D5 Diesel engines – engine codes D5244T and D5244T2.