Do you have to drain the fuel tank to replace the strainer?
The strainer is part of the fuel tank outlet line and requires draining the fuel tank to clean or replace the strainer. So, is you have a low fuel system pressure as measured at the fuel rail or are experiencing a low fuel pump capacity, before you replace the pump, first try replacing the fuel filter.
How do you remove a suction strainer from a fuel pump?
Using a 17 mm deep socket and ratchet or 17 mm wrench on the hex of the nozzle, turn counter-clockwise to remove the nozzle and strainer assembly. Make sure you have a container underneath the tank.
When to replace a fuel pump and filter?
Nevertheless, here are some reasons why the pump and filter may need replacement. Replace the pump if: The pump motor is shorted or burned, which is characterized by a blown out fuse. The pump motor is open. The fuse is ok, but it just won’t run. The pump is weak and fails to provide the needed fuel pressure.
How do you change the fuel filter on a car?
Slide the jack under the car at one of its designated jack points, then either pump or twist the handle to raise the vehicle (depending on the style of jack). Once the vehicle is jacked up, place jack stands beneath it before working under the vehicle. Never rely on a jack to support the weight of a vehicle you are beneath while working.
Nevertheless, here are some reasons why the pump and filter may need replacement. Replace the pump if: The pump motor is shorted or burned, which is characterized by a blown out fuse. The pump motor is open. The fuse is ok, but it just won’t run. The pump is weak and fails to provide the needed fuel pressure.
How do you change the fuel pump on a Harley Davidson?
The filter on an early bike can simply be changed by removing the petcock from the tank. Before messing with the fuel tank and pump, the whole fuel injection system needs to be purged of fuel pressure to avoid any unwanted fuel spills, though the tank does not have to be emptied or removed.
Slide the jack under the car at one of its designated jack points, then either pump or twist the handle to raise the vehicle (depending on the style of jack). Once the vehicle is jacked up, place jack stands beneath it before working under the vehicle. Never rely on a jack to support the weight of a vehicle you are beneath while working.
When to replace fuel filter on Harley Davidson?
Not only is regular replacement of the fuel filter part of your bike’s basic maintenance needs, but filter replacement will also allow for inspection or replacement of the in-tank fuel lines and fuel pump assembly. A clogged filter can hinder engine performance to the point that the bike may become unrideable.
How do you drain fuel from a gas tank?
Place a container under the fuel line and loosen the hose clamp to start draining the fuel from the tank. When the container is full, pinch the line once again with the hose clamp to stop the flow of fuel until you can replace the full container with an empty container. Repeat this process until all of the fuel is drained from the tank.