Can you change the speakers on a Jeep Wrangler?
When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with your new receiver. The Wrangler’s speakers are relatively easy to reach and replace, so you’ll get much better sound with minimal effort.
What kind of stereo system does a Jeep Wrangler have?
The Jeep Wrangler came with a standard AM/FM/CD receiver and offered two speaker options. 4-speaker system: two 4″ 2-way speakers in the dash and two 5-1/4″ speakers in the roll bar; 7-speaker system: two 4″ speakers with accompanying tweeters in the dash, two 5-1/4″ speakers in the roll bar, and a 6-3/4″ sub in the center console.
How big is the sub in a Jeep Wrangler?
Here are the dimensions for this factory sub location: You may have to re-drill screw holes, but you should be able to find a small 6-1/2″ or 6-3/4″ sub that’s within these dimensions. And, as long as you’re going to drop an upgraded sub in the console, you might as well put a small amp under the seat to give it some decent power.
Do you need an amp for a Jeep Wrangler?
And, as long as you’re going to drop an upgraded sub in the console, you might as well put a small amp under the seat to give it some decent power. If you’re keeping the factory amp, you’ll want to replace the factory dual 2-ohm voice coil sub with another DVC sub so you don’t lose power.
Can a quadratec subwoofer be replaced in a jeep?
We stock hard to find replacement speakers that you can only get from Quadratec, like the factory subwoofer found in the 01-06 Wrangler, in addition to speaker pairs and all the way up to complete audio system overhaul kits that include every speaker you need for your Jeep. Some kits even include additional amplifiers and subwoofers!
Where can I get speakers for my Jeep Wrangler?
You have plenty of options for replacement speakers, as there’s plenty of room in both locations. Your Wrangler may not have speakers in the dash, in which case you’ll have to go to your Jeep dealer for speaker grilles and brackets.
The Jeep Wrangler came with a standard AM/FM/CD receiver and offered two speaker options. 4-speaker system: two 4″ 2-way speakers in the dash and two 5-1/4″ speakers in the roll bar; 7-speaker system: two 4″ speakers with accompanying tweeters in the dash, two 5-1/4″ speakers in the roll bar, and a 6-3/4″ sub in the center console.
Is it possible to replace a car woofer?
Since replacement woofers are not available through the dealership parts network, speaker replacement was not an option. The factory speaker features special electrical characteristics, dual voice coils, shallow mounting depth and a unique bolt pattern, making it impossible to cross reference to another speaker.
When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with your new receiver. The Wrangler’s speakers are relatively easy to reach and replace, so you’ll get much better sound with minimal effort.
Where do you put an amp on a Jeep Wrangler?
Lots of Wrangler owners install an amp and sub enclosure in the area behind the seats. If you like to get a lot of mud on your Wrangler, it’s a good idea to splice connectors into the power and speaker wires so you can quickly remove your sub from the back of your Jeep when you’re heading out on the trail.
How tall is the center console on a Jeep Wrangler?
If you’re into building your own enclosure, here’s the available space: Width (side to side) = 35″, Height = 15″, Depth (front to rear) = 7″ at top, 10″ at bottom. The height measurement brings the box even with the top of tailgate. You’ll have to remove the center console to replace the factory subwoofer.