Can I use my own modem with EIR?

Can I use my own modem with EIR?

Can I use my own modem / router? Router: You can also use a third party router behind the eir modem (either as an access point or in bridge mode), however, we do not support configuring these devices, so you will need to take care of that.

Can I replace my EIR modem?

my eir Fibre modem is broken, how can I get a replacement? Please contact eir Technical Support on 1901 and a replacement modem will be arranged for you. You’ll need to return the old modem and all accessories to eir.

How do I connect to my EIR modem?

If you are availing of our standard broadband service:

1. Open your browser, type 192.168.
2. Enter [email protected] as the username.
3. The password is broadband1.
4. The option to change your WiFi password will usually be located on the homepage when you login or in your network settings.

Why is WiFi not working EIR?

Check the basics Turn off the modem using the On/Off switch. Unplug the power source on your modem. Wait 2 minutes for your modem to restart. The DSL light should be solid and the internet light should be flashing.

How do I change my Eircom router?

How can I change my WiFi name / SSID?

1. Open your browser, type 192.168.
2. The username required is admin.
3. The password is the same as your WiFi key (printed on the base of your modem router).
4. The option to change your WiFi name will usually be located on the homepage when you login or in your network settings.

How do I set up my Fibre modem?

Otherwise, you can connect your modem to the Fibre box yourself with these steps:

1. Locate the Fibre box in your house. It will often be on a wall.
2. Check that it’s plugged in to the wall.
3. Check the power and optical/PON lights are green and lit up.
4. Once your modem is delivered you can connect it to your Fibre box.

How do I connect my eir Fibre modem?

Connecting modem for Fibre up to 100Mb

1. Plug one end of the supplied grey DSL cable into the DSL port (left hand side of the main phone socket) of the eir F2000.
2. Plug the other end of the cable into the DSL jackpoint.

How do I set up my Eircom modem?

Plug the other end of the cable into the electrical outlet of your home.

1. You have successfully connected your eir fibre box to the power supply.
2. You can now turn on your eir fibre box using the power button on the back.
3. Wait 5 minutes for all the connections to be established.
4. Choose NEXT to continue the installation.

Where does my Eircom efibre modem need to be connected?

Eircom says that your new eFibre fibre broadband modem / router must be connected to your main telephone socket but that they can move this socket by a few metres if you request it.

What do you need to know about the eir Fibre box?

This user manual is dedicated to the eir fibre box product. This equipment is a gateway which gives users broadband Internet access from their computer, tablet, smartphone or game console by various Ethernet or Wi-Fi (IEEE 802.11n or 802.11ac) interfaces via an ADSL/ADSL2/ ADSL2+/VDSL2 and FTTH networks. eir fibre box User Manual

What kind of wifi does the EIR F2000 have?

The Irish ISP Eir (formerly Eircom) supplies the F2000 modem router with its fibre broadband package, which provides 802.11ac Wi-Fi on the 5GHz band in addition to the 802.11n Wi-Fi commonly available on other Wi-Fi access points.

What does gateway mean in the EIR user manual?

To ease legibility of the user manual, the term “gateway” will be used throughout the document to designate the eir fibre box modem. Guide to symbols used in this manual