Can I upgrade my v6 to a v8?
If your v6 is a 90 degree one derived from a v8 maybe you can just drop in the crank from the similar v8. Same for the camshafts. If your v6 is not 90 degree then the crank needs to be a split pin design either custom made or from a similar 60 degree v8.
How much does it cost to upgrade a V6 to a V8?
New engines start at around $4,000 for a 4-cylinder, around $5,500 for a V6 and $7,000 for a V8. Prices increase from these figures based on complexity of the engine and the brand of car.
What kind of engine do you need for a Camaro Firebird?
If your 4th gen F-body is in need of an engine and your are not quite ready to part ways with the car, this article will outline the best budget engine options available to get your car back up and running again. Perhaps the cheapest engine swap that can be accomplished on the Gen 4 Camaro/Firebird is the “Vortec” LM7/LM4 5.3L engine.
Is the tach on a V8 the same as a V6?
Although the V6’s and V8’s operate at the same PSI, the V8’s use a higher volume. 99-02 LS1’s have the fuel regulator built into the tank. Gauge Cluster The speed reading is different, and the tach reading is different. Not changing the clusters will cause the tach reading to be erratic.
What do I need to swap an LS engine?
Swapping to a LS based engine will typically require a new transmission, engine cradle, radiator, fuel pump assembly, gauge cluster, PCM and wiring harness, strengthened suspension components, and new throttle assembly.
What kind of tank does a 99-02 LS1 have?
Although the V6’s and V8’s operate at the same PSI, the V8’s use a higher volume. 99-02 LS1’s have the fuel regulator built into the tank.
Can a LS engine be swapped into a Firebird?
This Tech Tip is From the Full Book, SWAP LS ENGINES INTO CAMAROS & FIREBIRDS: 1967-1981. For a comprehensive guide on this entire subject you can visit this link:
If your 4th gen F-body is in need of an engine and your are not quite ready to part ways with the car, this article will outline the best budget engine options available to get your car back up and running again. Perhaps the cheapest engine swap that can be accomplished on the Gen 4 Camaro/Firebird is the “Vortec” LM7/LM4 5.3L engine.
How do you swap a Camaro for a Firebird?
In fact, several bolts connect to the firewall and the inner fender well bolts. Use a 9/16- and 1/2-inch socket and ratchet to remove these bolts. Be sure to disconnect important components, such as the front wiring, ground wires, hoses, and anything else that might get in your way.
Swapping to a LS based engine will typically require a new transmission, engine cradle, radiator, fuel pump assembly, gauge cluster, PCM and wiring harness, strengthened suspension components, and new throttle assembly.