Can a power steering pump be removed from a Grand Prix?
On Grand Prix models equipped with the 3.8-liter engine, removing the power steering pump will help you access the water pump. This is optional. If you do remove the power steering pump, the bolts must be tightened to 25 foot-pounds of torque when replaced. Use caution when working with engine coolant.
How to replace the water pump in a Grand Prix?
Learn more about removing and replacing the water pump in your Grand Prix, including proper tightening procedures for different engines. Park your Grand Prix on level ground. Gather your tools for easy access and disconnect the negative battery cable.
Why is my steering wheel hard to turn after power steering pump?
Sometimes after a power steering pump is installed, reduced pressure inside the hydraulic lines will build, which can create the symptoms you’re experiencing.
How do you remove a pulley from a water pump?
Loosen the bolts on the pulley, but do not remove them. Once the pulley bolts are loosened, turn the pulley to remove the accessory belt, and then finish removing the pulley. Set the pulley and its bolts aside. Remove the five bolts (all models) mounting the water pump.
On Grand Prix models equipped with the 3.8-liter engine, removing the power steering pump will help you access the water pump. This is optional. If you do remove the power steering pump, the bolts must be tightened to 25 foot-pounds of torque when replaced. Use caution when working with engine coolant.
How do you remove air from a power steering pump?
Here’s how to remove the air from your power-steering pump. Advertisement. Make sure the engine is off and cool. Remove the power steering reservoir cap and check the power steering fluid level. Add as much fluid as needed to fill it up. Replace the cap.
How can I get power steering fluid out of my car?
Remove the floor jack from underneath the engine. Fill the pump with power steering fluid using a funnel if necessary and bleed the system. Start the engine and turn the steering wheel completely from side to side; check the steering fluid frequently and add as needed until you purge the air from the system.
What to do if you have a water leak in a Grand Prix?
Replace the coolant drain plug and replenish the coolant system. Reconnect the negative battery cable, and then start the engine and check for leaks. On Grand Prix models equipped with the 3.8-liter engine, removing the power steering pump will help you access the water pump. This is optional.