Can a Mercedes EIS steering lock be replaced?
As for the Electronic Steering Lock or ESL, we can provide a permanent replacement that you only need to do once. We’ll replace the steering lock with an emulator. It bolts into the exact location as the lock.
How to replace ignition lock switch in Dodge Caravan?
This helpful video details the replacement of a faulty ignition lock switch in a Dodge Caravan. In step-by-step detail, the steering column and instrument panel covers are removed to access and remove the lock-switch. A rebuilt switch is then installed.
How does the Mercedes EIS ESL ignition system work?
The Mercedes EIS ESL Electronic Ignition Switch and Electronic Steering Lock system exists to make sure your car isn’t stolen. Your key has a sequential code, unique to your vehicle, and when inserted into the ignition, your car runs a series of tests, to make sure it’s the right key.
What happens if you have a faulty Mercedes ignition switch?
Some common issues that you may experience due to a faulty Mercedes EIS or ESL: Faulty Mercedes EIS ESL? Mercedes Electronic Ignition Switch EIS ESL system falters, “Turn and Start” will deactivate and you won’t be able to start your car.
How do you remove steering shaft lock cylinder?
If you wish to eliminate the Steering Shaft Lock feature, remove the swaged in cover piece on the side of the Steering Lock Housing and drive the the lock shaft out of the housing thru this opening. If you use the new lock cylinder you will also have to use the new ignition keys that come with it, thus having two different keys for the car.
Where is the ignition switch on an Audi?
With the Steering Lock Housing out and in hand, remove the Ignition Switch from the back of the Housing and drill the Lock Cylinder release access hole in the Steering Lock Housing per B 48.6.
How to replace the ignition switch on a Mercedes Benz?
Remove these two screws. Next remove the bezel or trim (red arrow) surround around the ignition switch. This simply unscrews counter clockwise. You should be able to do this with finger pressure but some trim pieces need a little help to get started with your trim removal tool.
What kind of Screws do I need to replace my W203 ignition switch?
Remove the three T20 Torx screws holding the lower panel to the dash (red arrow) along with the one T20 screw (yellow arrow) holding the dash. Note: a previous owner had replaced some of the Torx screws with household Philips screws.
How to replace the ignition switch on a Mercedes C320?
Click here to order! This article will show you how to replace the electronic ignition switch in your Mercedes C320. NOTE: The switch is included under Mercedes-Benz “theft- relevant parts program” and must be ordered VIN specific and reprogrammed by a dealership.
As for the Electronic Steering Lock or ESL, we can provide a permanent replacement that you only need to do once. We’ll replace the steering lock with an emulator. It bolts into the exact location as the lock.
What to do if your Mercedes EZs ignition switch is not working?
If the other key works, keep using it for a couple of weeks to verify that the issue is really the key and not the EIS. Try scanning your Mercedes-Benz for fault codes. Ideally using a Start Diagnostic Scanner. This scanner should still retrieve fault codes when the ignition is off.
Where can I get an electronic steering lock installed?
You must now buy them through a MBZ dealership service dept where installation and programming is required by an authorized MBZ mechanic. Make sure that the very first thing you do is install the key in the ignition and that it frees up the electronic steering lock. Then leave the key in even though you are disconnecting the battery.