Why is my moto G5 not working?

Why is my moto G5 not working?

Solutions: First, restart your Moto G5 or the Moto G5 Plus device. Turn off the Wi-Fi slider once by going to settings>Wi-Fi and then turn it back on to see if it make any difference. Reset the network settings by going to Settings >Back up & Reset > Reset network settings and then tap on Reset.

How do I hard reset my Motorola G5?

Hard Reset

1. Power the phone completely off.
2. Press and hold the “Volume Down” and the “Power” buttons simultaneously.
3. Use the “Volume Down” button to toggle the selection on the menu to “Recovery mode“.
4. Press the “Power” button to choose the “Recovery mode” selection.
5. A screen should appear with the Android robot.

How do I force restart my Motorola G5 plus?

In the unlikely event that your moto g5 plus becomes unresponsive, try a force reboot. Warning: Don’t attempt to remove or replace the battery —doing so may damage the battery and could cause burning and injury. To reboot the device, press and hold the Power key for 10 – 20 seconds.

How do I fix my Motorola phone stuck on boot and reboot?

Steps to Try When Android is Stuck in a Reboot Loop

1. Remove the Case. If you have a case on your phone, remove it.
2. Plug into a Wall Electric Source. Ensure your device has enough power.
3. Force Fresh Restart. Press and hold both the “Power” and “Volume Down” buttons.
4. Try Safe Mode.

How do I factory reset my Motorola G?

Press and hold the Volume Down button and the Power button at the same time until the phone turns on. Press the Volume Down button until you see Recovery mode. Press the Power button to restart in Recovery mode. Use the Volume buttons to scroll to Wipe data/factory reset, then press the Power button to select it.

How do I hard reset my Motorola?

Once the Android recovery screen displays, press and hold the Volume up key for 10-15 seconds. Quickly tap and release the Power key. The Android recovery screen will appear. Scroll down using the Volume down key to highlight Wipe data/factory reset.

How do I get my phone out of Safe Mode Motorola?

To exit Safe Mode, press and hold the power button. Select “Restart.” If you aren’t prompted to restart, continue to hold the power button until your device restarts.

What is Safe Mode in Motorola?

Safe mode allows you to turn on the device with third-party apps disabled. Then you can easily remove all apps that may be causing a conflict or software problem. Tap Ok when Reboot to safe mode appears on the screen. Safe mode will appear in the bottom left corner.

What is recovery mode in Moto G5 plus?

Charge your battery 30% or more. Turn off the phone. Press and hold the Volume Down button and the Power button at the same time until the phone turns on. Press the Volume Down button until you see Recovery mode. Press the Power button to restart in Recovery mode.

What do you do if your phone is stuck in a Bootloop?

Press and hold both the “Power” and “Volume Down” buttons. Do this for about 20 seconds or until the device restarts again. This will often clear the memory, and cause the device to start normally.

What to do if your Motorola Moto G5 Plus is not recognized?

If you need help in the configuration, contact the developer of your security software. Third solution: Check and ensure Motorola drivers are installed on your computer. Again, USB drivers and a dedicated software (Motorola Device Manager) are needed to connect your Motorola phone to your computer via USB cable.

When did the Motorola Moto G5 come out?

Motorola Moto G5 Released 2017, March. 145g, 9.5mm thickness 0.7% 4,450,254 hits 120 Become a fan 5.0″ 1080×1920 pixels 13MP 1080p 2/3GB RAM Snapdragon 430 2800mAh Li-Ion

How to do a soft reset on a Moto G5 Plus?

A soft reset effectively clears minor software errors that caused random issues without affecting saved data on the internal memory. Here’s how a soft reset is done on your Moto G5 Plus: Press and hold the Power button for a few seconds and then release when the Power off menu appears. Tap Power off to turn the phone off.

Is the motion control on the Moto G5 working?

Moto G5 has come integrated with this gesture and motion control feature that allows us to turn on the flashlight or launch an app through gesture. But unfortunately, some users have stated that this gesture and motion control is not working on their latest Moto G device perfectly.

If you need help in the configuration, contact the developer of your security software. Third solution: Check and ensure Motorola drivers are installed on your computer. Again, USB drivers and a dedicated software (Motorola Device Manager) are needed to connect your Motorola phone to your computer via USB cable.

A soft reset effectively clears minor software errors that caused random issues without affecting saved data on the internal memory. Here’s how a soft reset is done on your Moto G5 Plus: Press and hold the Power button for a few seconds and then release when the Power off menu appears. Tap Power off to turn the phone off.

How can I unlock my Moto G5 Plus?

1. Delete the unlock password & reconfigure with a different password. 2. Tap on Settings>> Apps & notifications>>All apps>>3 vertical dots>>Reset app preferences>>Reset apps. I own a moto g5 plus and there is a issue in it.

How to fix Motorola Moto G5 black screen of death?

While holding down the Power button, press and release the Volume Up button. Then press the Volume Down button to scroll to and highlight Wipe data/factory reset option. Press the Power button to confirm selection. Press the Volume Down button to scroll to and highlight Yes — erase all user data.