Why is my Mercedes navigation not working properly?

All the units which are part of the fiber optic need to be in proper working condition. If your Mercedes uses a separate drive for the NAVI DVD, it is possible that this unit can be defective. Learn more about fiber optic problem by reading Mercedes Audio System Explained. The DVD drive that holds your navigation disk could be damaged.

What to do when your navigation system is not activated?

If you are trying to update the navigation system using an update DVD you may get an error message saying Loading Navigation. This process can take a while in some cases up to one hour. Try removing the Navi DVD, turn off your car and let it sit for one hour.

What to do if your Navi button is not working?

Press NAVI button and wait for the system to restart. If that doesn’t work go to the next step. Try resetting the COMAND system by removing the fuse for 15 minutes. Reinsert the fuses and check if the error message is gone. Check all the cables and connections in the back of the COMAND or the DVD drive.

Why is my Navi CD not working properly?

Make sure the Navi disk itself isn’t damaged. If your stereo has only one slot for the Navigation DVD and audio CD, try inserting an audio CD or DVD to see it that works properly. If it does then the problem may be your disk and not the optical lens.

How does the Chrysler 300 navigation system work?

Unlike cell phone apps that feature small screens and even smaller buttons, the 300 navigation system is designed for driving. A map update keeps your vehicle ready for the road ahead. To find the map that’s right for your vehicle, select the appropriate model year from the menu above.

What to do if your navigation system is bad?

Check that the disc is not scratched or otherwise damaged. If it is good then the problem is likely with the navigation unit about which nothing can be done. The only way out is to replace the whole system. Navigation system problems are often difficult to resolve because of the multiple factors which could be responsible.

Why is my Chrysler navigation system not working?

These are two unconnected issues. The system clearly has an internal radio issue which has nothing to do with the disc not ejecting. If the disc cannot be removed, inspect it for damage and ensure that it is clean. Disconnect the battery for a couple of minutes and then reconnect it which may help.

How to troubleshoot a GPS navigation unit in a car?

1 Turn the vehicle key to ACC or IGNITION position. 2 Connect the power cable to the GPS navigation unit if it is a stand-alone unit. 3 Check the fuses in the fuse panel. It’s normally on the driver-side of your car. Replace any blown fuses. 4 Make sure the battery is fully charged if it has a battery.

What does it mean when no navigation module is connected?

So, I bought another battery (same specs) and mounted in place. The message ”No navigation module is connected” is it shown on car display. I measured the new Becker battery and is almost empty, so that is mean the navigator module does not recharge battery anymore.

What does it mean when it says navigation cannot be activated?

Error message “Navigation CanNot be Activated” usually means that the Navigation system is not being able to start up (boot up) which could be due to several reasons. Common problems include wrong DVD disk, issues with the navigation processor A40/3n2 or fault in CAN bus (controller area network) communication.

What does the Mercedes SL navigation system do?

The Mercedes Benz SL is a luxury model car with a navigation control system. The navigation allows you to customize the vehicle to your own driving and comfort preference; however, if you want to restore it to factory settings or troubleshoot problems with the navigation system, you can do this by locating the reset function on the settings menu.

What to do when your navigation system won’t work?

During this time don’t start the car, open doors or even unlock the vehicle. You want your Mercedes-Benz to go to “sleep.” After the waiting period reinserting the navigation disk into the DVD slot and try to power up your COMAND system. Press NAVI button and wait for the system to restart. If that doesn’t work go to the next step.

Which is Mercedes COMAND navigation DVD map disk do I Need?

Other MERCEDES-BENZ models. Older models used Navigation CDs instead of DVDs also referred to as COMAND NAVIGATION 10 DISCS SET. The CD had maps for specific regions. Mercedes data card may say that your Mercedes-Benz has COMAND DVD APS USA but that is not enough to determine which navigation disk you need.

How to fix a Mercedes Benz navigation system?

Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order. Chances are the symptoms may return. If this happens repeatedly, a professional Mercedes Benz repair technician or mechanic can help check any updates for your COMAND / navigation unit. Find the fuse box under the dashboard.

How to soft reset COMAND / nav radio system?

How to perform a soft reset of the COMAND / NAV Radio System. Find the fuse box under the dashboard. Pry the side cover, look for fuse 26 and 28 and remove both fuses. The second fuse box may be on the left side of the trunk. Locate and remove fuse 6. Take out the key from the ignition and don’t turn on the car for at least 15 minutes.

Are there any problems with Mercedes Benz COMAND system?

We have listed down common issues with the Mercedes-Benz COMAND system, including problems with The most common solution to fix any of these issues is to try to perform a soft reset of the COMAND unit.

Is the SD card on my C300 not working?

I purchased an OEM navigation SD card from eBay for my 2019 C300 Sedan, which has the factory pre-wiring in place. However, when I insert the SD card into the slot in the storage compartment under the armrest, it does not appear to get detected.

Where does the navigation go in a Mercedes C Class 3?

Once you buy the Navigation, which is an SD Card chip, you just insert it inside the SD Card slot in the middle compartment and leave it there forever. Nonetheless, the similarities end right there.

Are there any Mercedes C300 navigation systems left in stock?

Only 2 left in stock – order soon. . Only 18 left in stock – order soon. . Only 15 left in stock – order soon. . Only 15 left in stock – order soon. . Only 4 left in stock – order soon. . Only 10 left in stock – order soon. . Only 12 left in stock – order soon.

What to do if your Mercedes Benz Radio is not working?

For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.

Why is my navigation DVD not loading on my stereo?

If your stereo has only one slot for the Navigation DVD and audio CD, try inserting an audio CD or DVD to see it that works properly. If it does then the problem may be your disk and not the optical lens. If you are trying to update the navigation system using an update DVD you may get an error message saying Loading Navigation.

Why is the navigation screen on my Mercedes GLC black?

When I put the car in reverse, it worked fine, but when I started driving, the navigation screen, the radio screen and the media screen was black. After I got home a few minutes later, I turned my SUV off and on again couple of times, and each time it was black.

What happens if a CGW fails on a Mercedes?

A bad CGW can also cause the engine to randomly shut off even when driving. You will have several warning lights stay ON on your cluster, and several features stop working. Below is a list of warning lights and problems you may notice if your Mercedes Central Gateway Control module fails.

Why does my Mercedes central gateway not work?

When the Mercedes Central Gateway Module fails, one or more of these systems may stop working. Mercedes Central Gateway Module may fail due to water damage. It can also fail from internal software or hardware defects. Damage to the Mercedes Central Gateway Control module can be caused by a blocked drain valve in the trunk floor.

Why does my Mercedes zgw control module not work?

Mercedes-Benz Central Gateway Module ZGS (also referred to as CGW) may fail, causing various warning lights or systems to stop working. Mercedes Central Gateway module is the hub that allows communication between various modules. Mercedes ZGW Gateway control module stores data for Mercedes ASSIST or ASSYST plus.

How to remove COMAND stereo radio unit Mercedes Benz E320?

Once you remove the CD changer you will have access to two bolts at the bottom of the COMAN head unit. These two bolts have Torx heads. You will need to get the bolts loose, they can not be removed completely.

Why is my Navi DVD not working on my Mercedes?

Is there a fault code on a Mercedes?

Such error doesn’t store a code so scanning for fault codes with Star Diagnostic scanner or iCarsoft MB II will show no errors. Most of the time the Mercedes dealer won’t be able to recreate this error due to the fact that it randomly happens and it doesn’t provide a fault code.

Why is my navigation not working on my Mercedes medic?

Reinsert the fuses and check if the error message is gone. Check all the cables and connections in the back of the COMAND or the DVD drive. Especially if work was done near those units. It is possible that one of the cables in the back of the unit has gotten loose or is disconnected.

Why does my Mercedes W203 220cdi not start?

The car will not start or crank after a few months being idle and all lights etc are functioning as they should. Initially the cooling fan was coming on when the ignition switch was turned to start. Some fiddling about with the ecu and sam and copious amounts of electrical contact spray sorted the cooling fan.

Why is the radio not working on my Mercedes Benz?

Is the radio on your Mercedes-Benz not working? Some common problems with the Mercedes-Benz COMAND system include issues such as: Radio panel doesn’t turn on. (Hint: Check fuses.) The fist thing you should try is to do a soft reset of the COMAND unit.

How can I tell if my Mercedes remote is working?

Next, we need to check if the remote is sending out a message. The remote emits infrared waves. While you can’t see infrared light with your eyes, there is an easy way to check. Grab your phone and turn on the camera. Point the camera to your phone and carefully see if you notice a light every time you turn you press a button on the remote.

What to do if your sat nav is showing the wrong location?

If your device has serious internal issues you could take it to a service centre where technicians could replace any damaged or broken parts. Wrong location. If your sat nav is showing the wrong location, whether by a few meters or by miles, you might be experiencing some serious positioning issues.

How can I Reset my Mercedes SL navigation system?

Hold the button for about three seconds. If you want to reset just the navigation system, go to Step 4. Press the “Reset” button again to confirm the request. This will reset all the sub-menu functions. Press the up or down arrow to select a function from the sub-menu. Select the “Nav” menu to select from the navigation settings.

How much does it cost to repair a Mercedes navigation system?

Note: Faceplate appearance may vary . Part Number: 2049006108, A2049006108, 204 900 61 08, Common Problem: Navigation does not work, keeps rebooting, Distorted Audio, Repair Cost: $285. to $650.

How to install Mercedes Benz E W211 DVD navigation system?

This W211 has fiber optical amplifier in the trunk, so it should use our 6m long power cable B5 to connect speakers directly and by-pass the existing amplifier, as this w211 dvd navigation does not support fiber optical amplifier, but this unit has 4x45w amplifier built-in.

How does the Mercedes Benz E class navigation system work?

The E-Class update features fresh data that helps improve routing accuracy and fuel economy. These optimizations complement the many benefits of your in-vehicle navigation system. Unlike cell phone apps that feature small screens and even smaller buttons, the E-Class navigation system is designed for driving.

Why is my navigation system not working properly?

It is possible that one of the cables in the back of the unit has gotten loose or is disconnected. Another common error message that you will see is “Navigation is initiating please wait” Under such conditions the COMAND system works correctly except the navigation system. Here are a few possible causes and solutions to this problem.

What does it mean when Mercedes says navigation cannot be activated?

After inserting the navigation DVD in your Mercedes-Benz COMAND, you get a warning message “Navigation Cannot Be Activated.” You press the NAVI button on the COMAND but get an alert message saying “”Navigation can not be activated. An error has occurred.” N1112 No data transfer between D2B master and D2B predecessor component possible.

Is the Mercedes-Benz navigation system part of COMAND?

The Mercedes-Benz Navigation System is part of the COMAND® infotainment system, and there is a multitude of ways to initiate turn-by-turn directions and customize your display to suit your needs.

Is the radio on my Mercedes Benz E320 not working?

I have a e320 2003 and the radio unit doesn’t work anymore i thought the display (lcd) was gone .

Are there any Mercedes navigation DVD’s left in stock?

Only 3 left in stock – order soon. . Only 1 left in stock – order soon. . Only 4 left in stock – order soon. . Only 6 left in stock – order soon. . Only 6 left in stock – order soon. . Only 3 left in stock – order soon. . Only 1 left in stock – order soon.

Why does my Mercedes Benz key not turn?

Key won’t turn the ignition/ Driver Authorization System. The most likely scenario if your key won’t turn is that the battery is fully or partially discharged as it won’t allow the electronic ignition system (EIS) to function properly. Ensure that your battery is working properly.

What are the problems with a Mercedes Benz?

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More …

What should I do if my Mercedes Benz won’t start?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

How to use Navi on a Mercedes Benz?

When the Vehicle is Stationary: 1 Press the NAVI button on the dash or press the central controller and choose NAVI from the menu on the central display. 2 Rotate the controller and choose Destination. 3 Choose Address Entry (or From POIs) from the menu, then follow the prompts to input the full address. 4 Select the route you want.

What should I do if my Lexus navigation system is not working?

Turn on the vehicle and test to make sure the system is working properly. Follow the directions on the screen. This article is written for the 2001-’06 Lexus LS430 but is applicable for any Lexus or Toyota with the same navigation system. Always disconnect the battery when working on automobile electronics.

Is the 2004 Lexus ES330 navigation system DVD available?

For Chrysler, there currently is a coupon, it is ‘NAVIFREESHIPNT’ for free shipping. How to Updated 2004 Lexus Es330 navigation systems DVD . Unfortunately, Lexus and Toyota updates are not available online in North America.

Is the 2004 Nissan 350Z a good car?

Can’t Stop Smiling! Just purchased a 2004 cherry red 350z with black drop top and black leather w/only 19000 miles…I’ve read the other reviews and agree that it is such an enjoyable ride that you will find any excuse to drive it…and it is a head turner. This is like heaven on the eyes.

What kind of engine does the Nissan 350Z have?

The 3.5 liter V-6 is responsive and the power delivery is smooth and satisfying. The exhaust note is a “love it or hate it” affair for most folks and fortunately for me, I have no issues with how the Z sounds.

What kind of car is a 2004 Cherry Red 350Z?

Just purchased a 2004 cherry red 350z with black drop top and black leather w/only 19000 miles…I’ve read the other reviews and agree that it is such an enjoyable ride that you will find any excuse to drive it…and it is a head turner. This is like heaven on the eyes.