Why is my Mercedes-Benz E320 key not turning?

Why Won’t My Key Turn? What are common reasons my Mercedes-Benz E320 key won’t turn? While there are a variety of reasons your Mercedes-Benz E320 key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

What are the common problems with Mercedes key fobs?

Common Mercedes Key Fob Problems Go to top 1 Mercedes key fob not working after battery change 2 Mercedes remote doesn’t work anymore 3 Keyless remote doesn’t lock/unlock the car 4 Mercedes key fob won’t unlock doors 5 Panic button doesn’t work 6 Trunk unlock doesn’t work

What kind of key does a Mercedes Benz use?

While most Mercedes-Benz cars have the SmartKey some models such as the ML Class, SLK Class, Crossfire used a metal blade key up to 2005. Some models suffer from the defective key tumbler. We have seen cars with as little as 20,000 miles where the tumbler go bad. Make sure the steering wheel is not in a locked position as mentioned above.

How do I Sync my Mercedes fob to my car?

To synchronize a Mercedes-Benz key to your car all you need to do is insert the key into the ignition for a few seconds. This works in most cases but every now and then you may need to follow further instructions to synchronize your Mercedes key fob remote with your car.

What to do if your Mercedes key won’t turn?

If you have this problem you will have to install a new / virgin EIS. You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.

Why does my Mercedes Benz make a clicking noise?

It requires electrical power to crank the engine. The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars.

What should I do if my Mercedes Benz won’t start?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

Why does my Mercedes not start when I charge the battery?

This Mercedes-Benz is not starting because of a low battery. In this case, what you need to do is trickle charge your battery using any of these 12 volt battery trickle chargers. If you need help read this article on How to charge a Mercedes-Benz the right way. Mercedes won’t start, and it’s not the battery.

What to do when key won’t turn in ignition?

The steering wheel can become stuck in position which in turn locks the ignition. Wiggle the steering wheel back and forth while gently turning the key to see if the key now turns. If this work, you don’t have an ignition or key problem at all, the steering wheel had just locked it up.

What causes a car key to not turn over?

This can trap a piece of the key inside the cylinder, causing more damage. Also known as a key cylinder, the ignition lock cylinder is another area that could be causing issues with a key turning over. Below are the two most common problems associated with the ignition lock cylinder and the key not turning.

What happens if you put the wrong key in the cylinder?

Factor 3: Incorrect key. Sometimes it’s a simple mistake, and the wrong key is inserted into the cylinder. This happens most often when someone has more than one car key on their key ring. Many keys look similar, especially if they are from the same make. So double check the correct key is being used to try to start the vehicle.

How long does it take to get key for Mercedes E320?

Cost is for one key only. It will take 2 business days for key to arrive to dealer. I have 2001 e320 that had lights left on battery died. I used jumper box to start car then charged battery and now ignition wont turn. Steeing ingnition is locked key.

What to do if the key does not turn in the ignition?

If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key. The steering wheel will feel completely solid if you try to move it in one direction and may move slightly in the opposite direction.

Why does my steering wheel not turn when I turn the key?

Turn the Steering Wheel The most common reason that a car key will not turn is that the steering wheel has locked. This will happen when the steering wheel has been moved after the key has been removed from the ignition cylinder. Turn the steering wheel to the right and left.

What causes a locked steering wheel to not turn in?

If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.

Why is my ignition not working on my Mercedes Benz?

It is possible that the battery in the car is defective, as it does not provide the necessary voltage for the ECU and the N73 Electronic Ignition/Starter Switch (EIS) to function properly. If the battery is dead or has low voltage / under voltage, the CAN communication between EIS and N72 may not function properly.

How can I unlock a locked steering wheel?

1. Try pulling the key out a very small amount before gently turning key. (About 1/16 of an inch, the thickness of a nickel). 2. Wiggle key while trying to turn key gently.

What happens when the ignition lock cylinder fails?

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What causes a Mercedes Benz key to not turn?

List of common problems and possible solutions 1 Locked Steering Wheel. New drivers always experience this at least once, so we thought we would include it in this list. 2 Discharged Battery Undervoltage. 3 Key Tumbler Defective. 4 Defective Electronic Ignition/Switch System EIS / N73. 5 Smart Key Remote.

What’s the best way to turn the key in a car?

Push the steering wheel in the direction that allows a little movement and then insert the key and try to turn the key again. You can put pressure on the steering wheel and also try shaking the steering wheel. As you do this insert the key into the ignition and try to turn the key. DO NOT TRY TO FORCE THE KEY IN THE IGNITION.

What does it mean when your car key won’t turn?

If the car’s battery is dead, you will often notice that the key won’t turn. This isn’t unusual in higher end vehicles, which frequently use more complex electronic ignition systems. Check the life of your battery to verify this. Oftentimes, the problem is not with the related components of the car, but with the vehicle key itself.

Can a Mercedes Benz EIS be installed on a used car?

You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.

How do you open the trunk of a Mercedes Benz?

You will need to slide the locking tab with your thumb and pull out the metal key. Step 2. Insert the key into the trunk lock cylinder. Step 3. Turn the key until you hear the trunk pop open. Note: Avoid jump starting your Mercedes-Benz by connecting the jumper cables directly to the battery.

How do you open the hood of a Mercedes?

Get a locksmith to open one of the doors then follow these steps. Release hood by pulling on the hood release lever on the side of the dashboard. Next, open the hood. All Mercedes-Benz model year 2000 and newer have a jump start terminal inside the engine bay.

Where is the jump start terminal on a Mercedes?

Release hood by pulling on the hood release lever on the side of the dashboard. Next, open the hood. All Mercedes-Benz model year 2000 and newer have a jump start terminal inside the engine bay. Regardless if the battery is in the trunk or under the rear seat. Locate the positive jump starting terminal.

Why is my key not working on my Mercedes?

Maybe your key fob isn’t working or car battery is dead and you are trying to unlock the trunk of your Mercedes-Benz. If your car battery is dead or the key fob remote has stopped working, you won’t be able to unlock your Mercedes-Benz or open the trunk. Keys locked in the trunk How to open Mercedes trunk.

Why is my Mercedes-Benz E320 not turning?

Mercedes-Benz E320 Key Won’t Turn Repair Symptoms. When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns.

Why is the battery on my Mercedes Benz not working?

Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars. How old is the battery on your Mercedes-Benz?

Is the Mercedes Benz E320 CDI CDI for sale?

Owner is replacing car with a new E Series diesel. Mercedes-Benz : E-Class PRISTINE LOW MILES CDI E320 DIESEL AMG WHEELS LOW MILE E320 CDI AMG DIESEL MERCEDES FLORIDA METICULOUSLY MAINTAINED PRISTINE ! E320 CDI AMG DIESEL MERCEDES FLORIDA METICULOUSLY MAINTAINED PRISTINE !!

Is the radio on my Mercedes Benz E320 not working?

I have a e320 2003 and the radio unit doesn’t work anymore i thought the display (lcd) was gone .

Why is my Mercedes EZs EIS ignition not working?

The only issue here is that if you can’t turn on the ignition, you can’t power on the OBD2 port and the iCarsoft MB II scanner. If the ignition turns on intermittently, consider yourself lucky and scan for codes. Hopefully, there are fault codes that will point you to the problem. Diagnosing Mercedes ignition problems isn’t a simple DIY job.

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What happens when the ignition switch fails in a car?

When the electrical portion of the ignition switch fails, the vehicle will permanently or intermittently lose power to certain systems and components, depending on which positio… Read More

Why does the key not turn when inserted in the ignition?

The EIS module could also be the reason that the key does not turn when inserted in the ignition. Many car owners complain that the car starts fine on a warm or hot day but in cold days the car will not start. This may sound strange, but it is reported frequently.

Why do I have the wrong key in my ignition?

Sometimes it’s a simple mistake, and the wrong key is inserted into the cylinder. This happens most often when someone has more than one car key on their key ring. Many keys look similar, especially if they are from the same make. So double check the correct key is being used to try to start the vehicle.

Why does my car key not turn on?

The most likely scenario if your key won’t turn is that the battery is fully or partially discharged as it won’t allow the electronic ignition system (EIS) to function properly. Ensure that your battery is working properly.

Do you need a new Mercedes Benz key?

If you own a newer Mercedes-Benz, you don’t need the old keys to order a new Mercedes key. Just follow the instruction below on how to order a new Mercedes key. We have learned that Mercedes-Benz no longer makes replacement keys for older models.

What should I do if my Mercedes key fob is not working?

If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light. The light should light up every time you press any of the buttons (Lock, Unlock, Panic, Trunk).

What to do if your e320 won’t start?

Connect jumper wires to the “+” and “-” terminals on your battery and then connect the other end of the jumper wires to a different car battery. Start the other car with the wires connected and then try to start your car. Leave the E320 running for about 15 minutes to allow the battery to charge.

What to do if your Mercedes won’t start?

My Mercedes E320 Won’t Start: Troubleshoot 1 Insert your key into the E320’s ignition and turn it. Listen for a “clicking” noise. 2 Look at the fuel gauge while the key is in the ignition. Add gas to the car if needed and then try to start the E320. 3 Open the E320’s trunk and locate the battery.

Why does my Ford e320 have a dead battery?

Your issue could be occurring due to low fuel level, a bad alternator, or a low charge on your battery. Your E320 might have a dead battery, which would need to be replaced. You don’t have to be a certified mechanic to get your E320 up and running.

Why does the key not turn in the ignition?

The key won’t turn in the ignition If the key won’t turn in the ignition, it could be for a couple of reasons: Often this happens when the steering is locked by the ignition lock with the front wheels turned aside (e.g. when parking on a hill) or when one of the front wheels is pushed against something (e.g. curb stone).

What to do when your car key won’t turn?

DAS was introduced back in 1996 and has had several security improvements. The main DAS versions DAS are DAS 2, 2A, X, 3. New drivers always experience this at least once, so we thought we would include it in this list. If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key.

What’s the best way to turn the ignition?

Then insert the key into the ignition and gently jiggle the key without putting much pressure on the key as do this. As the lock pins on the tumbler wear out it will get harder and harder to turn the ignition of your car. Here is a video that will help you understand this problem.

How does a locked steering wheel work on a Mercedes Benz?

As for the steering column, it does have a wheel lock device like just about every car made since 1970 when that feature was introduced. If you shut the engine off when the steering wheel is turned hard, the steering (and ignition tumbler) can lock up. Then you turn the steering wheel enough to unload the locking mechanism and you’re done.

1. Try pulling the key out a very small amount before gently turning key. (About 1/16 of an inch, the thickness of a nickel). 2. Wiggle key while trying to turn key gently.

Why is my Mercedes E class steering lock not working?

For owners of Mercedes C-class and E-class vehicles, this is all too common of an occurrence and is frequently a result of a faulty electronic steering lock. The electronic steering lock or ESL prevents the vehicle from being steered unless the correct key is present in the car or the ignition switch.

What should I do if my Mercedes FOB is not working?

How do you program a Mercedes fob remote?

There are a few cases when you need to program your key fob remote to your Mercedes-Benz. Below you will find general instructions on how to synchronize a Mercedes key fob. For model specific instruction check your owner’s manual. Insert the key into the ignition. Quickly remove key from ignition and within 10 seconds hold down the lock button.

What should I do if my key fob is not working?

Remove the metal key from the keyfob and use it to manually unlock the doors. Next, you need to check the fuse for the central locking circuit. Not only that but also look at the fuse for the Antenna Module and AAM.

What happens if you leave your key in the ignition?

In addition to that the constant power running through the ignition coil itself can cause the coil to overheat and get damaged. However, all of that being said, leaving the ignition on without the engine running will eventually cause the battery to go dead. That’s never a good thing. Furthermore, why do people leave keys in car?

Can a car battery die if you leave it in the ignition?

Yes, leaving the key in the ignition will drain the battery dead in just a few days.

What causes a Mercedes Benz ignition to not turn?

Mercedes EZS EIS Ignition Switch Problem, Cause, Solution. A problem that Mercedes-Benz owners may face is the key no longer turns in the ignition. This issue is often caused either by a defective key, bad shifter module, a failed Electronic Ignition Switch (EIS) also known as the EIS-EZS or a bad steering lock module (ESL).

Where is the VIN stored in Mercedes EZs ignition module?

The VIN stored in the Ignition Module (EIS-EZS) matches that of the car; it’s your old module after all. Just install it and you are ready to go. Check out these companies that provide Mercedes EZS EIS Ignition Module online.

What are the problems with a Mercedes Benz?

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More …

Place the probes of the voltmeter on the battery terminals and not on the connectors of the battery cables. If you the engine didn’t crank, then both of the voltage readings should be the same.

What should battery voltage be on Mercedes E320?

To start the diagnostic process, check your battery voltage before and after turning the key to the “start-position”. Before turning the key to position-III, the battery voltage should be around 12.5V or above. Place the probes of the voltmeter on the battery terminals and not on the connectors of the battery cables.

How does the starter work on a Mercedes E320?

When the current passes to the + side of the solenoid, it closes the circuit, energizing the windings (the “coil” part) which creates a magnetic field, actuating a shaft, engaging the pinion starter gear and simultaneously closing the relay, allowing the large current draw to pass to the starter itself.

How to change Mercedes Benz remote key battery?

– YouTube How to Change Mercedes Benz Remote Key Battery TRICK To Open It! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What kind of battery does a Mercedes Benz FOB use?

If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key.

How do you change battery on Mercedes smart key?

To remove the metal key from the remote, push catch on the side and pull. Pull out the metal key. Turn the remote around. Insert the metal key to release a catch that will cause the cover to pop out. Stick one piece of sticky tape to one side of the battery. Stick another piece, front to front as shown.

What to do if your Mercedes ignition switch is not working?

If you have a spare key try to see if you are experiencing the same symptoms with the other key. If the other key works, keep using it for a couple of weeks to verify that the issue is really the key and not the EIS. Try scanning your Mercedes-Benz for fault codes. Ideally using a Start Diagnostic Scanner.

Why does my Mercedes Benz not turn on?

A problem that Mercedes-Benz owners may face is the key no longer turns in the ignition. This issue is often caused either by a defective key, bad shifter module, a failed Electronic Ignition Switch (EIS) also known as the EIS-EZS or a bad steering lock module (ESL).

Can a Mercedes W210 pull the ignition key out?

Well, first off, the brake has zero to do with pulling a key out on a W210 (at least on MY2000). Started, turned off, tons of times without sitting in the seat with foot on brake. I will also keep an eye on the shifter being fully in park and wheel position. From what I understand, there is no shifter adjustment, so who knows.

Can you remove the ignition switch from a Mercedes Benz?

The ignition switch on your Mercedes is coded to the vehicle, so you will have to reprogram the system for the computer to recognize it. The switch itself is easy to remove but you must first remove the steering wheel, steering column tube module and the trim around the gauge cluster.

Why does my Mercedes not start when I Turn on the ignition?

Despite this brand’s high quality, though, Mercedes’ can develop problems with or without regular car maintenance. There are a few theories about why your Mercedes refuses to start when you switch the key in the ignition.

Why did my Mercedes EIS ignition switch fail?

Mercedes-Benz ignition switch (often referred as immobilizer module) can become faulty and in some cases due to user error. For example, some common reasons why the ignition module failed are: Connecting jump starting cables while key is in the ignition. During any of the above scenarios, the EIS-EZS may lose its memory.

Where is the ignition key on a Mercedes Benz?

There are 4 electronic and/or mechanical modules that are synchronized for everything to work ok: 1. The key (electronic key); 2. The electronic ignition switch (eis, the place where you put your key in); 3. steering locker; 4 the central electronic circuit module.

What does it mean when your ignition key won’t turn?

The key (electronic key); 2. The electronic ignition switch (eis, the place where you put your key in); 3. steering locker; 4 the central electronic circuit module. If only one of them has a problem, the key will refuse to turn.

Why is my Mercedes Benz ESP light not working?

Low Battery Voltage – If you have an old Mercedes-Benz battery which is not supplying the needed voltage you can cause ESP malfunctions and a variety of other problems such as ABS and ETS warnings. This is tricky because the battery may start the car just fine, but it doesn’t maintain the requried voltage while the car is running.

Who is the Mercedes mechanic for the E320?

Answered in 1 minute by: 3/29/2012 Mercedes Mechanic: Marty, Mercedes Technician replied 9 years ago Marty, Mercedes Technician Category: Mercedes Satisfied Customers:57,141 Experience: Bosch Certified Master Tech. Over 35 years experience. Verified eurotec :

What kind of compressor does a 2002 Mercedes E320 have?

2002 Mercedes E320 compressor had 12 volts but won’t engage . read more Lou Palomino associates in automotive technology 11,061 satisfied customers EC light will not turn off not getting air conditioning

What to do if your Mercedes Benz key fob is not working?

1. Put the key in the ignition. 2. Quickly remove it within 10 seconds and hold down the Lock button. 3. While holding the Lock button, press Unlock five times. 4. Release these buttons and press the Trunk button once.

Is the Mercedes Benz E320 an all wheel drive car?

The engine, handling and ride are all lovely. For 1999, Mercedes has successfully overcome one of the two major flaws present in earlier iterations of the E 320; namely, they added all-wheel drive–a huge improvement over the previously hopeless-in-the-snow rear-wheel-drive models.

What to do if you lost your Mercedes Benz key?

If you lost a key and you are worried that it is in the wrong hands, you can take your car to the dealer and they can disable the lost key. Mercedes Benz says that they need to synchronize the new key to the car.

How much does it cost to get a new Mercedes Benz key?

In some cases, new keys may cost up to $560, as reported by Mercedes-Benz owners. Wait 3 to 4 days for the key to be shipped to your dealership. Keys are made in USA in some cases they have to be shipped from Germany in which case you may have to wait up to 10 days. All the required documents as if you were the owner of the car plus you will need:

Do you need to synchronize new Mercedes Benz key?

Mercedes Benz says that they need to synchronize the new key to the car. You can easily do that yourself. The key comes pre-programmed to your car and it will start it without any further programming. The synchronization is more for the doors, windows, unlock function.

What does the fob remote on a Mercedes Benz do?

The newer keys have a transponder integrated in them. The key fob remote serves two purposes. First it disables the anti-theft system when you unlock the car. Second, Drive Authorization System verifies the key to make sure it is the right key to start the car.

How does a smart key work on an ignition switch?

As you insert the Smart Key remote into the Electronic Ignition Switch (EIS) control module (N73), power is supplied to the key by the induction coil ring located in the EIS. Data is then exchanged with the infrared transmitter to validate the Drive Authorization.

Navigation