Why is my airbag light blinking ON my Nissan versa?
This means either your airbag is malfunctioning, or it malfunctioned in the past.
How do you reset the airbag light on a 2015 Nissan Versa?
How To Reset Nissan Versa SRS Airbag Warning Light
- Turn the ignition key to position “ON” without starting the engine.
- Watch the airbag light closely.
- Wait for more than 3 seconds.
- Repeat steps 1-3 two more times until you have done the cycle three times.
- Now turn the key on and watch the light.
Why is the security light blinking on my Nissan Versa?
If you don’t have a smart key FOB that light blinking indicates that your vehicle immobilizer is active and functioning. If the light is steady on there is a malfunction of the immobilizer system. Basically it has to do with your registered, chipped key.
How to turn off the SRS warning light?
1 Turn ignition ON. 2 The SRS warning light will come ON for 7 seconds then go out. Turn the ignition OFF within 1 second of the lamp going out 3 Wait 3 seconds then repeat the above steps 3 times. 4 Switch ignition back ON and wait for the SRS light to begin flashing. 5 Read codes as described in the Code Format Description below.
Is there a problem with my Nissan Versa?
Hi all, my 2014 VersaNote SV Nav has similar problem. The Nissan Vehicule Immobilizer System (NVIS), i.e. the <little red car with black key in it> indicator on dash display stays ON at all times while the car is functioning. It does not disallow me to start the car.
How to reset the airbag status light on a Nissan?
Step 1 Insert the key into the ignition and turn the key to ON. Notice that the light will stay on and then start blinking. After turning the key to ON, wait until the light turns to off, to start the blinking process, and then switch the key OFF and remove the key. Wait 5 seconds. Stick the key back in the ignition and repeat step 1.
1 Turn ignition ON. 2 The SRS warning light will come ON for 7 seconds then go out. Turn the ignition OFF within 1 second of the lamp going out 3 Wait 3 seconds then repeat the above steps 3 times. 4 Switch ignition back ON and wait for the SRS light to begin flashing. 5 Read codes as described in the Code Format Description below.
How to reset the air bag warning light on a Nissan easy?
This is the procedure for resetting the air bag light for all Nissan’s. The vehicle in the video is a 2005 Nissan Xterra. 1. Turn key to the ON position. Wait until the airbag light turns off then immediately turn the key to the off position. 2. Wait 5 Seconds 3. Repeat Steps 1 and 2 two more times 4.
How to scan a Nissan airbag fault code?
Scan Tool for Codes and Live Data for your Nissan Airbag (SRS) from $149.95 The information below may apply to Nissan 200SX and many other models If SRS light is already flashing the vehicle may already be displaying fault codes, skip to step 5. Please Note:When code reading is finished the vehicle must be returned to normal operation mode.
What is no fault code on Nissan 200SX?
• No fault codes indicated by continuous short flashes. • Code Format Diagram shows code No. 12. The example model (s) shown, Nissan 200SX for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.