Why does my welder not work?
One of the most common reasons your welder won’t spark is because the connection points between the welder and the metal pieces are not clean or clear. This means that both the workpiece where you want to form an arc as well as the connection point for the work lead clamp need to be bare metal.
Why is my flux core welder not working?
It is most often the result of too slow of a wire feed speed and/or holding the welding gun too close to the workpiece. To prevent the problem, be sure to use the correct feed speed for your application. Maintain a distance from contact tip to the work of no further than 1 1/4-inch.
Why is my MIG welder not working?
Things to Check When Your MIG Welder Stops Working. Your ground cable needs to be secured tightly to the inside of the welder. Check your connection inside the machine and make sure the wingnut or fastener holding the cable in place hasn’t worked itself loose or broken.
Why does my Polo 1.4 petrol not start?
Vw polo 1.4 petrol will not start. Over the past 3 weeks my sons polo has been difficult to start. The engine turns over fine but it will not fire. To-day I removed each spark plug individually and checked for a spark. They all seemed ok. I also disconnected the fuel line and turned the ignition and the fuel seemed to pump through ok .
What to do if your Polo is not starting?
Polo not starting ? Works perfect for a few days. Battery is fine. Only way to start it is to hold gas pedal right down and swing it. Normal starting requires no gas pedal. Any ideas folks ? I’d definitely take it to a dealer to get checked up. Is it not under warranty still?
Why does my VW Polo start at night?
I have a VW Polo the problem I am having is starting it wether it be day or night when the car has been parked up, or when the engine has cooled right down after. a long trip. The problem continues. Could you please give me advice how this can be fixed.
Why is my welder not sparking when I turn it on?
If your welder still won’t spark, there may be problems with the welder itself. These are the 5 most common reasons why your welder won’t spark: Metal connections areas are not clear or clean The work lead clamp is not properly connected