Why does my Mazda 3 Rattle over bumps?
The interior of the Mazda 3 and CX 30 look almost the same and it’s the very same rattles when you go over the very same (light) bumps on the road. I reckon this is a problem out of the factory because the two cars make exactly the same sounds at exactly the same place on the same road.
Why does my Mazda 3 want to stall?
I’ve got the EXACT same problem. Put it in Neutral or Park, idles at 700 RPM. Put it in Drive and brake, idles at 300 and it feels like the car wants to stall. When the car is cold, it’s fine. When it warms up, it acts up.
Is the Mazda TSB supposed to have bumpstops?
A huge thanks to Mazda Tech Arnel! It’s not bumpstops as others have doubted nor worn endlinks, but DRY STRUT MOUNT BEARINGS! Removed both front struts. Bumpstops are supposed to move freely:
Why does my Mazda 3 have rough idle?
Since the brakes are vacuum-assisted, it makes me think that there is a brake booster vacuum leak that is letting unmetered air into the intake which is affecting the idle. Sometimes you can hear the leak by listening carefully as you press down on the brake pedal or hear it squeak by pressing hard and fast on the pedal.
A huge thanks to Mazda Tech Arnel! It’s not bumpstops as others have doubted nor worn endlinks, but DRY STRUT MOUNT BEARINGS! Removed both front struts. Bumpstops are supposed to move freely:
How to fix a bumpy ride on a golf cart?
You can also check out with a tire shop to get the tires balanced. Check the spring bushings in your cart suspension to see if they are damaged. If so, replacing them with new ones should help. If the golf cart has been sitting idle for a long time, you might have a bumpy ride when you use it.
What’s the problem with Mazda’s suspension clunk?
A huge thanks to Mazda Tech Arnel! It’s not bumpstops as others have doubted nor worn endlinks, but DRY STRUT MOUNT BEARINGS! Removed both front struts. Bumpstops are supposed to move freely: Buttoned everything up. Tested, drove………. Interesting…
It was the rear driver side coil spring, it had the bottom rung cracked off of the rest and every time there was sufficient jarring of the vehicle it would rattle against the rest of the coil spring as well as the coil spring mount. Whoever has this issue with rattling maybe check it out?
Where does the clunking sound come from in a Mazda3?
There is a clunking sound coming from the front passenger corner of my 2006 Mazda3. Underneath the passengers feet. I’ve had this issue for … read more Subaru and Nissan factory t…
A huge thanks to Mazda Tech Arnel! It’s not bumpstops as others have doubted nor worn endlinks, but DRY STRUT MOUNT BEARINGS! Removed both front struts. Bumpstops are supposed to move freely: Buttoned everything up. Tested, drove………. Interesting…
It was the rear driver side coil spring, it had the bottom rung cracked off of the rest and every time there was sufficient jarring of the vehicle it would rattle against the rest of the coil spring as well as the coil spring mount. Whoever has this issue with rattling maybe check it out?
What’s the problem with the Mazda 3 suspension?
Had the same problem on a Mazda 3 2005 Broken rear springs with last half coil sitting in rear control arm Put your finger in it a see if something moves very sharp edges. The Mazda 5 is a clunking blunder!
What kind of noise does a Mazda 3 make?
I have a 2007 Mazda 3 sedan with ~100,000 miles on it (it’s the 2.0L version). Last October, I noticed a significant clanging noise that was coming from the rear of the vehicle whenever I went over some small bump.
Why does my Mazda 3 make a clunk sound?
This part is explained in the owner’s manual. The a/c light won’t be on, but the compressor will run. It helps to dehumidify the air. I have a brand new Mazda 3 with 4000 miles on it and it started making quite a nasty clunk sound in the back hatch area particularly when going slowly over bumps. It got worse and I took it into the dealer.
Why does my Mazda 3 squeak when I drive?
I purchased a used 2005 Madza3 in December and I now have a loud squeaking sound originating from somewhere near the rear wheels when I drive. As I drive faster the sound is faster and when I brake there is a sound of metal crunching metal. As the car slows the scrapping sound also slows until I am stopped and there is no sound at all.