Why does my Jaguar XK8 not leak oil?
But they do not always leak, because the chunks of congealed oil act as leak-plugs, which means the problem worsens with age, while remaining invisible. All that changes when the fluid is flushed.
Why is my Jaguar XK hydraulic top not working?
If the reservoir level is persistently going down and requires periodic attention, then the cause is probably a leaking lift cylinder. The leak occurs in the seals that ride on the shaft as it goes in and out to raise and lower the top. A quantity of oil is lost during each roof operation. Jaguar XK Hydraulic Upgrade Kit Contents:
Are there any issues with the Jaguar XK8 convertible top?
I’ve written a few articles about the issues with Jaguar XK8 Convertible top hydraulics over the years. I’d like to begin by referencing Jaguar’s own technical service bulletin on this topic – Issue: early XK8 Convertibles may experience slow operation of the convertible top, or slow or erratic operation of the latch.
What should I do if my XK8 convertible top leaks?
The lesson for owners of pre-2000 XK8 convertibles: If you have trouble with the top, be prepared for the possibility of leaks after flush, and if that happens, rebuild the whole thing and have done with it because the alternative will be replacing everything one part at a time, which will cost you a lot more in the end.
But they do not always leak, because the chunks of congealed oil act as leak-plugs, which means the problem worsens with age, while remaining invisible. All that changes when the fluid is flushed.
I’ve written a few articles about the issues with Jaguar XK8 Convertible top hydraulics over the years. I’d like to begin by referencing Jaguar’s own technical service bulletin on this topic – Issue: early XK8 Convertibles may experience slow operation of the convertible top, or slow or erratic operation of the latch.
The lesson for owners of pre-2000 XK8 convertibles: If you have trouble with the top, be prepared for the possibility of leaks after flush, and if that happens, rebuild the whole thing and have done with it because the alternative will be replacing everything one part at a time, which will cost you a lot more in the end.
Where is the hydraulic valve on a Jaguar XK?
Position the Hydraulic Valve on the top side of the pump motor with the pointed end toward the front of the car and fasten the other end of Hose 2 to Valve Port 2 and tighten with the 11/16 wrench. Refer to Figure 5. 12. Adjust the position of the Valve and hoses to be on top of the motor with the pointed end toward the front of the car.
Position the Hydraulic Valve on the top side of the pump motor with the pointed end toward the front of the car and fasten the other end of Hose 2 to Valve Port 2 and tighten with the 11/16 wrench. Refer to Figure 5. 12. Adjust the position of the Valve and hoses to be on top of the motor with the pointed end toward the front of the car.