Why does my EPs light keep turning on?
When the EPS light turns on it indicates there is a malfunction detected in the power steering system. The power steering on this vehicle is electric. First step in addressing this problem is a complete scan of the vehicle’s computer systems.
Why is the EPs light on in my Elantra?
Even faults which are not directly in the power steering system can effect it and turn on the light. Once the faults are collected from the systems, they can be addressed accordingly depending on which computer is detecting which fault.
How to fix EPs warning light on a Hyundai I 20?
HOW TO FIX EPS WARNING LIGHT ON A HYUNDAI I 20 hyundai 20… Hello. The electronic power steering system is a newer form of power steering the uses an electric motor and gear reduction to assist with steering. This of course replacing the standard hydraulic power steering fluid system.
What can possibly cause an EPS malfunction?
If your electric power steering isn’t working it should be setting a code, assuming the control unit has power and you can communicate with it. I believe (all?) Hyundai’s put the motor, control unit and sensors in the steering column assembly. First check your fuses, power loss is more likely than a motor or sensor failure.
When does the EPs light come on and off?
This EPS issue appeared suddenly, and the last I had driven the car was about 12 hours prior and all was well. There have since been instances where the steering works perfectly fine for a few seconds upto a couple minutes and the EPS light is off, then the EPS light is back on and the steering is stiff again.
Why does my Hyundai Elantra have a coupler?
The Hyundai Elantra has a small motor attached to the steering column that contains a small rubber coupler. This coupler can wear down and make the steering wheel thump when turning.
If your electric power steering isn’t working it should be setting a code, assuming the control unit has power and you can communicate with it. I believe (all?) Hyundai’s put the motor, control unit and sensors in the steering column assembly. First check your fuses, power loss is more likely than a motor or sensor failure.
What happens when you lose power steering assist?
This causes the system to default to its manual power steering mode, making it unexpectedly more difficult to steer. In the event that a driver loses powering steering assist, a red “EPS” will become illuminated on the dash display screen and the driver will be forced to apply higher than normal effort to turn the steering wheel.