Why does my 1998 S10 V6 stall out?
Sometimes after sitting overnight my 1998 s10 v6 4×4 manual transmission, will start up and in a split second lower the idle to almost nothing… sometimes it will stall out. It will start after 3 or four times after doing this.
Is there a leak in my Chevy S10?
The leak is showing up on the top front left part of my 4.3 Vortec Z engine.Like right next to the Thermostat housing.Is it possible the Lower intake Manifold could be leaking. the engine runs fine other than the leak. We have a 2000 S-10 with the same engine.
What’s the problem with my Chevy S10 Blazer?
My 92 S10 blazer w/ FI, V6, std. trans., runs for about 5 minutes then dies and will not start. If left to sit the process will repeat. Let it sit overnight and it starts. I have tried letting it sit for an hour and it didn’t.
Why did my brakes go out on my Chevy S10?
I have a 2003 chevy s10 pickup. I just lost my brakes the went out. I installed new brake lines and new vacuum hoses to power booster. I bled all brakes and have fluid in lines. When the truck is off and brake is pushed, its very stiff and hard to push down. If I start truck and push brake it’s very easy to push to floor.
Why does my Chevy S10 engine not start?
The second way that your S10 won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own. When the engine isn’t turning over at all, that’s a bit easier to diagnose than when it is cranking but not firing.
Why does my 1998 S10 Blazer not run?
My buddies 1998 S10 Blazer will not run. When you hit the key the engine turns over and starts normal but dies right away. It gets gas from the initial priming but that’s it. It will do this all day long. The fuel pump was replaced 3 months ago, you can hear it running as soon as you turn the key on.
What to do if your Chevy S10 is stalling?
Before troubleshooting any automotive issue, including stalling issues with the S10, make sure that you check the vehicles trouble codes with an OBD2 scanner. Trouble codes are always a great place to start diagnosing problems on today’s modern computer controlled vehicles. Without them, you are in the dark. These codes are vital to diagnosis.
How does the ignition work on a S-10 Blazer?
Troubleshooting the ignition system in your S-10 Blazer begins with a basic understanding of how the system works. Electrical power is supplied to the primary coil of your ignition coil by the ignition module, generating a magnetic field around the secondary coil in the ignition coil.