Why does EPs warning light come on while driving?
EPS warning light comes on while driving,power steering does’nt work and car becomes sluggish Hyundai I 20 My car has 141000 miles. My car has a manual transmission. Hello. The electronic power steering system is a newer form of power steering the uses an electric motor and gear reduction to assist with steering.
What does the power steering system warning light mean?
What the power steering system warning light means This warning light tends to be in the shape of a steering wheel, sometimes with an exclamation mark. For cars with electric power steering, the light may say EPS, for electric power steering. Either way, the warning light will be yellow or red in color.
How do you turn off the EPs light?
Turn and hold the steering wheel 45 degrees to the left of the straight ahead position. 4. Turn the ignition switch to “on” position, the EPS light will come on then will go off after 4 seconds. 5. Within 4 seconds of the EPS light going off turn the steering wheel to the straight ahead position and release the wheel.
Why is the EPs light not on on my Honda Civic?
However, if there IS damage to the steering rack and pinion, there usually is an odd sound and rough steering a driver can hear and feel. This usually occurs when turning. If the car’s CPU can’t be activated when the EPS light comes on, the DTC is not memorized.
What the power steering system warning light means This warning light tends to be in the shape of a steering wheel, sometimes with an exclamation mark. For cars with electric power steering, the light may say EPS, for electric power steering. Either way, the warning light will be yellow or red in color.
What to do when the EPs light goes off?
Within 4 seconds of the EPS light going off turn the steering wheel to the straight ahead position and release the wheel. The EPS light will then come on again 4 seconds after releasing the wheel. 6. Within 4 seconds after the EPS light comes on turn the wheel 45 degrees to the left again and hold it untill the EPS light goes off again. 7.
However, if there IS damage to the steering rack and pinion, there usually is an odd sound and rough steering a driver can hear and feel. This usually occurs when turning. If the car’s CPU can’t be activated when the EPS light comes on, the DTC is not memorized.
How can I reset the EPs on my car?
To Reset the EPS, follow these simple instructions. 1. Set the steering to straight ahead (with vehicle on ground) and switch ignition to “off” position. 2. Jump the OBD2 test port (left side of the centre consol under carpet) with a paper clip going from the bottom right pin to the 4th up from the bottom pin on the left side of the grey plug. 3.