Why are the mileage gauges on my Jeep Cherokee not working?

Every once in a while when driving the airbag light turns on and the gauges do not work. When this happens the mileage does not record. We found out that by hitting the horn lightly two times the gauges will work again. Not a big deal, but annoying. The gauges on the dashboard sometimes don’t work.

Why does my Jeep Grand Cherokee not work?

All gauges do not work ( work briefly if i press on the brake) I sent my Jeep to a mechanic I had problems my gauges did not work and he said it could be a coil spring or ignition. He serviced my vehicle and changed the ignition. That did not fix the problem but the items listed above do not work. He did

What’s the problem with my 1998 Jeep Cherokee?

No one has added a helpful site for this 1998 Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: After the dealer fixed the problem for the recall on the airbag module problem, the airbag light stays on and gauges and odometer work intermittently. The gauges are not working 80% of the time.

Why are all of my gauges not registering?

The sending unit wire could be bad or broken, or the circuit from the gauge to the sender is incomplete. Without a ground, the gauge will not register. It is highly unlikely that all the sender units are bad, so we can rule that out. Of course, it is also possible that all the gauges are malfunctioning.

Why are the gauges on my Jeep YJ not working?

It is not that uncommon for Jeep Wrangler YJ dash gauges to go out and the fix can be fairly easy…. if you can find the problem. I show the steps I went through on how to fix the gauges on my 1994 Jeep wrangler YJ. 2: Cleaning the ground wires on the engine. 3: Removing the instrument cluster to check the connection of the gauges.

Why is the instrument cluster on my Jeep Cherokee not working?

The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.

Why are all the lights on my Jeep Cherokee not working?

The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.

Why is the CPS on my Jeep Cherokee not working?

According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM. Again, another reason why I don’t think that the CPS is bad.

Why is my Jeep Grand Cherokee not starting?

Like the Check Engine light issue, this part of the 1994 Jeep Grand Cherokee PCM problems stems from a faulty PCM providing wrong input to the vehicle. When this happens, ignition or starting issues occur. If your PCM is defective to a point where it cannot make adjustments to the timing or air-to-fuel ratio, then your Jeep may not even start.

What’s the speedometer on a 2017 Jeep Grand Cherokee?

My 2017 Jeep Grand Cherokee is showing my speedometer in MPH, my range is in ml, showing current km/L and Average of km/L 7 people found this helpful. Had the problem where I would enter the average to MPG and it would switch back to KM/L after about 24 hrs.

What does the PCM do on a 1998 Jeep Cherokee?

One function of the Jeep Cherokee PCM is to control fuel injection and determine the right time to switch gears. If the PCM is faulty, it can lead to stalls or rough idling. Unfortunately, this is part of the 1998 Jeep Grand Cherokee PCM problems, and one of the most frustrating issues owners had to address.

Why is My Check Engine light turning on on my Jeep Cherokee?

The PCM may provide wrong inputs, which leads to other problems. Among these are engine light issues and power steering, according to Jeep Cherokee owners. The Check Engine light turning on randomly tops the list. Reasons that your Check Engine light turning on include emissions problems, faulty O2 sensors, and problems with the PCM.

Where are the sensors on a Jeep Cherokee?

Your PCM has sensors on the radiator, the air filter, the vacuum pipe, the throttle body, and the crankshaft, to name a few. These sensors shouldn’t cause any disasters, but they can cause your PCM to make unnecessary adjustments that will affect your Jeep’s performance.

Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel

What kind of gauges should I use on my 1999 XJ?

Lol I’m thinking may just go with all aftermarket gauges , speedo and tach…..trace out the indicator lights and do it custom….any thoughts on gauges? I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months.

Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel

How to troubleshoot a car engine temperature gauge?

Touch the positive lead from your meter to the reference supply wire. You should see 5 or 12 volts with the ignition key in the “On” position, depending on how your vehicle is designed. Proceed to the next step, if you receive a voltage reading. If you do not get a reading,…

When does the temperature gauge go back to normal?

Q: Temperature gauge spikes up after driving for about 5–10 minutes, then returns just as quick to normal. Temperature gauge spikes up after driving for about 5–10 minutes, then returns just as quick to normal.

How can I tell if my temperature gauge is inoperative?

To diagnose an inoperative temperature gauge, you’ll need to test the coolant temperature sensor and the wiring for that circuit. You should have a service or repair manual written for your specific vehicle prior to attempting these tests. You will need to drain and fill the cooling system as well as test specifically colored wires.

Where is the temp sensor on a Jeep Cherokee?

Second, the temp sensor for the gauge is at the back of the engine in the head, the hottest place in the engine cooling system. It might be 220° there, but only 195 at the stat. It is a problem with a long engine block with the coolant coming all the way from the front.

What’s the temp of a Jeep Cherokee in Texas?

Here in Texas at a pretty constant 100 plus degrees during summer months my jeep will run all day at about 190 degrees if I leave the fan on while Im driving.

Why does my Jeep Cherokee Run so hot?

Lol, but I’d be more likely to put in a 195 or slightly hotter stat in than leave it completely without one Engines with no stat will have trouble warming up, except on a hot day. Then they will run hot and not cool down from the coolant not spending enough time in the radiator to remove heat.

What kind of engine does a 1999 Jeep Cherokee have?

The instrument readout is our 1999 XJ Cherokee with the engine running! This not so rare “No Bus” signal and gauge “drop-off” occurs, unexpectedly, on several Jeep models, including XJ Cherokees and TJ Wranglers from the OBD-II era.

How to unclip a 1999 Jeep XJ Cherokee?

The instrument panel bezel requires screw removal and unclipping. This is a 1999 Jeep XJ Cherokee, likely one of the most practical and simple 4×4 vehicles built since the Jeep CJ era! The dash panel cover also snaps into place. Unclip the front (furthest from windshield) first. At the angle you see, the panel pulls outward from the windshield end.

Why is the Speedo cable on my Jeep Cherokee not working?

No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector? okay well im out of answers. No speedo cable. They are electronic after 91. When you moved your grounds did you grind of the paint under the ground connector?

What are the different gauges on a jeep?

Most of our Jeep gauges like speedometer, oil pressure, tachometer, fuel and water temperature are designed to replace factory components and hook to existing wiring. Others like pyrometer and nitrous can mount in separate gauge clusters that are either pillar or dash mounted.

Can a tachometer be replaced on a jeep?

So if you have older ones that are malfunctioning or just outright dead, you can easily replace any gauge on your Jeep to keep it operating at peak performance. Most of our Jeep gauges like speedometer, oil pressure, tachometer, fuel and water temperature are designed to replace factory components and hook to existing wiring.

Where is the airbag light on a Jeep Wrangler?

NOTE: THE XJ INSTRUMENT PANEL CONTAINS ONE MORE CIRCUIT IN THIS CONNECTOR THAN THE TJ. CUT THE UNUSED WIRE CLOSE TO THE CONNECTOR ON TJ MODELS. Stagger cut the main harness and patch harness wires so that the solder joints will be 1/2 inch apart. Remove 1/2 inch of insulation from the wires. The new harness will have a dark blue with no tracer.

What kind of light does a Jeep Wrangler harness have?

The new harness will have a dark blue with no tracer. This will mate with a dark blue wire with a green tracer on TJ and with a dark blue wire with a white tracer on XJ.

Why does my speedometer not work with a new sensor?

Had check engine light come on. Ran codes came up with p1692 speedo sensor. Put new sensor and still speedometer will not work. Any suggestions please. I dont want to buy a new pcu unless I have to.

How much does it cost to repair a speedometer?

He said that the speedometer itself went bad and needed to be rebuilt (they don’t make replacements anymore) with a total repair cost of about $500. Welcome @corderm .

Navigation