Why are the ignition coils on my Mazda RX-8 weak?
It is widely known that the ignition coils on the Mazda RX-8 are weak and suffer from reliability issues, even on unmodified engines, as early as 30,000 miles and weak ignition coils eventually result in failure of the exhaust catalyst and/or long-term engine damage.
Why does my RX8 not start after a hot soak?
RX8 No Start & Hard to Start when Hot soak. This RX8 came into our shop for diagnosing no start when it is hot. When you drive for a while and turn off the engine, then if you try to restart after a short period, it refuses to restart (cranks ok). After at least fifteen minutes to half an a hour wait the car will start.
How often should I Change my Mazda RX-8 spark plugs?
We would normally recommend these be changed more frequently than Mazda Recommend ideally between 12 and 24 months or 12’500-25’000mile intervals. Available at a fraction of the cost and 100% genuine parts. This is a set of 4 genuine NGK platinum tip spark plugs for your RX-8 These are the cooler plugs with the following part numbers: …
What kind of HT leads do Mazda RX8 use?
Set of 4 Magnecore KV85 (8.5mm) Performance HT leads for you RX8 Standard Mazda HT leads do not offer the insulation and moisture protectio Set of 4 Magnecore KV85 (8.5mm) Performance HT leads for you RX8 Standard Mazda HT leads do not offer the insulation and moisture protection that the superior Magnecore HT leads do.
Why does my 2004 Mazda RX 8 not start?
“Owner dropped 2004 Mazda RX-8 to the dealer to fix recall, driver and passenger air bag, voluntary emission recall, and also owner complains that the engine won’t start when the engine is hot, you have wait for about 30 minutes to cool down the engine before the engine starts again. Advisor asked the owner to have the engine diagnose.
Can a Mazda RX 8 engine be rebuilt?
And mazda is building a factory according to their announcements to rebuild failed motors, but they will probably be rebuilt the same as the failed ones and use the same required oil to only fail again and again. Good luck with your RX 8.
Why is my Mazda RX8 rotary engine burning oil?
More than not, you will have to check your oil levels, and ensure you’re running a sufficient amount of oil. Perhaps this is the biggest problem with the rotary engine. With this engine you are burning significant amounts of oil, while it is also a challenge to seal off the different chambers.
How do you warm up a Mazda RX8 engine?
You need to warm up the engine slowly, stay in low revs depending on outside temperature for at least 20 minutes. Beware you need to warm up the oil, and the gauge on your dash is the water temperature, which heats up a lot faster! After that, drive it like you stole it.
Why is my Mazda RX8 rotary engine not working?
While nothing significant was etched in stone, lots of Mazda owners and third-party mechanics decided that the Rx8 rotary engine was experiencing lots of engine failure, due to ignition coil failure. But it was not just ignition coils, but a combination of other issues.
What to do if your Mazda RX8 engine is stalling?
Advisor asked the owner to have the engine diagnose. Results mechanic recommend to replace CAM SENSOR, stating has a high resistance when the engine is warm causing stalling, so mechanic replace the CAM SENSOR costing $773.47 for parts and labor.” “This is the 3rd engine they are wanting to put into the car for the same engine failure problem.
You need to warm up the engine slowly, stay in low revs depending on outside temperature for at least 20 minutes. Beware you need to warm up the oil, and the gauge on your dash is the water temperature, which heats up a lot faster! After that, drive it like you stole it.
Where to buy ignition coils for Mazda RX-8?
Your RX-8 is packing a punch with its lightweight engine, exquisite style, and sharp steering ability. Keep it sleek throughout by purchasing a new Mazda RX-8 ignition coil from AutoZone. There are so many components that keep a car running, and your ignition coils play a huge role in the overall performance of your vehicle.
What causes a Mazda RX 8 engine to fail?
Seals in engines though are failing due to too much heat as is evident from failed engines and cats plugged up with oil as documented on RX 8 owner forums.
Is the Mazda RX-8 a sporty car?
Mazda is known for producing sporty cars, but they went above and beyond when they built the Mazda RX-8. Your RX-8 is packing a punch with its lightweight engine, exquisite style, and sharp steering ability. Keep it sleek throughout by purchasing a new Mazda RX-8 ignition coil from AutoZone.
How does the Renesis work on the Mazda RX8?
The tiny packaging of the RENESIS allowed it to be mounted before the front axle, thus achieving a front-mid engine layout in the RX8. Crucial to the RX8’s well-regarded handling characteristics. With all that said, it’s precisely the aforementioned modifications Mazda made to the engine that made enthusiasts apprehensive.
Where can I buy a new ignition coil?
Keep it sleek throughout by purchasing a new Mazda RX-8 ignition coil from AutoZone. There are so many components that keep a car running, and your ignition coils play a huge role in the overall performance of your vehicle. Ignition coils are subjected constantly to high amounts of voltage, resulting in breakdowns and require a replacement.
Mazda is known for producing sporty cars, but they went above and beyond when they built the Mazda RX-8. Your RX-8 is packing a punch with its lightweight engine, exquisite style, and sharp steering ability. Keep it sleek throughout by purchasing a new Mazda RX-8 ignition coil from AutoZone.
Which is better RX-8 or OEM ignition coils?
The ignition coils used emit more current and voltage than the RX-8/OEM ignition coils and provide much longer life over the stock and most aftermarket systems. They are used in many racing applications, rival any coil in the aftermarket, and this system renders any additional/external ignition hardware unnecessary.
Keep it sleek throughout by purchasing a new Mazda RX-8 ignition coil from AutoZone. There are so many components that keep a car running, and your ignition coils play a huge role in the overall performance of your vehicle. Ignition coils are subjected constantly to high amounts of voltage, resulting in breakdowns and require a replacement.
How to replace the ignition coil on a Mazda 3?
In this guide, you will find instructions on how to replace the ignition coil on Mazda. These instructions were written for Mazda vehicles with four-cylinder engines and apply primarily to Mazda 3, 5, 6, CX5 CX7 CX9 with the inline-four engine.
Do you need to change ignition coil on CX7 CX9?
These instructions were written for Mazda vehicles with four-cylinder engines and apply primarily to Mazda 3, 5, 6, CX5 CX7 CX9 with the inline-four engine. Follow these instructions to replace the ignition coil on four-cylinder Mazda vehicles.
While nothing significant was etched in stone, lots of Mazda owners and third-party mechanics decided that the Rx8 rotary engine was experiencing lots of engine failure, due to ignition coil failure. But it was not just ignition coils, but a combination of other issues.
What are the spark plugs for a Mazda RX-8?
Introduction/facts/information. Spark Plug Facts and Information. The spark plugs in your RX-8 are for one, special spark plugs designed specifically for the RX-8. Secondly, there are 4 spark plugs of two different types on an RX-8 engine.
Advisor asked the owner to have the engine diagnose. Results mechanic recommend to replace CAM SENSOR, stating has a high resistance when the engine is warm causing stalling, so mechanic replace the CAM SENSOR costing $773.47 for parts and labor.” “This is the 3rd engine they are wanting to put into the car for the same engine failure problem.
More than not, you will have to check your oil levels, and ensure you’re running a sufficient amount of oil. Perhaps this is the biggest problem with the rotary engine. With this engine you are burning significant amounts of oil, while it is also a challenge to seal off the different chambers.
“Owner dropped 2004 Mazda RX-8 to the dealer to fix recall, driver and passenger air bag, voluntary emission recall, and also owner complains that the engine won’t start when the engine is hot, you have wait for about 30 minutes to cool down the engine before the engine starts again. Advisor asked the owner to have the engine diagnose.
It is widely known that the ignition coils on the Mazda RX-8 are weak and suffer from reliability issues, even on unmodified engines, as early as 30,000 miles and weak ignition coils eventually result in failure of the exhaust catalyst and/or long-term engine damage.
The ignition coils used emit more current and voltage than the RX-8/OEM ignition coils and provide much longer life over the stock and most aftermarket systems. They are used in many racing applications, rival any coil in the aftermarket, and this system renders any additional/external ignition hardware unnecessary.