Why am I not getting any sound from my amp?
Check for the audio input cable connectivity. There may be a loose wire on the connector or the connector terminals may be loose in the socket. Another thing to check is the audio input level. If it is too low the pre-amp stage in the amplifier may not be able to boost it to the required input stage of the amplifier.
Why is my amp NOT working with my speakers?
If your amp turns on but no sound comes out of the speakers, your overall setup may be the problem. Not all speakers are compatible with an amp. If your amp is still alive, it will respond when you connect it to speakers and other devices in good condition. Turn up the volume to see if anything changes.
Is there a way to fix an amplifier with no sound?
After spending some times to check the circuit board, I can’t believe that there were actually 15 bad components found which include the burnt resistor. After the replacement with new components the stereo power amplifier with no sound problem was finally fixed. I did not post the video thus you would not hear the sound but the sound worked!
What to do if your amp wont turn on when you turn it on?
Check the wiring to make sure the amp is plugged in. Go over all the wires, double-checking that they are plugged in correctly. If the amp doesn’t activate at all when you turn it on, the problem could have to do with the power supply.
How to repair TAC integrated stereo power amplifier no sound?
A customer of mine brought to me the TAC Integrated Stereo Power Amplifier With the Model of AV-355 for repair. The complaint was no sound but have power. Usually the first thing I do was to connect a speaker at the output jack to see if the sound really not present. Another test is to check the output DC voltage at the speaker output jack.
If your amp turns on but no sound comes out of the speakers, your overall setup may be the problem. Not all speakers are compatible with an amp. If your amp is still alive, it will respond when you connect it to speakers and other devices in good condition. Turn up the volume to see if anything changes.
What to do when your amp turns on but no sound?
You can check the problem by unplugging woofers wires from the amplifier if lights off then it means the problem is in the woofers then change the woofers. You can check both speakers and woofer individually by visual inspection. In this way, you can check which woofers giving you a problem and then replace that woofer.
What should I do if my amplifier malfunctions?
Do not attempt to repair an amplifier without following the appropriate safety protocols. This includes (but is not limited to) discharging the electrolytic capacitors if you are troubleshooting the circuit within the amp chassis. Note that electrolytic capacitors can pose a shock hazard even in the amp is turned off and unplugged.
Why does my electric guitar have no sound?
You’ve checked the amp, cables, and batteries and the ES indicator light is on, but there is still no sound. If you have a 9v-powered Expression System, an ES-T or ES-N system, there’s one more thing you can try on your own.