Who makes Hudson sprayers?
Dorian Drake’s Hardware, Lawn & Garden Group is the sales and marketing representative of the HD Hudson brand of sprayers in its markets.
Where are Hudson sprayers made?
The company, which manufactures compression sprayers used in the lawn-and- garden and public health markets, also has manufacturing facilities in central Iowa and southwestern Michigan. It is headquartered in Chicago.
Why is my Hudson sprayer not working?
Chances are there is dirt or debris somewhere in the discharge line. Most likely the nozzle is plugged. RELEASE THE PRESSURE by SLOWLY opening and removing the pump. Then, unscrew the nozzle cap and check to see that it’s clear (see diagram below).
What is a trombone sprayer?
SPRAYER CALIBRATION (Trombone bucket sprayer) Trombone bucket sprayers have a sprayer wand made up of two pieces. Trombone sprayers are useful in treating tall trees that cannot be covered by small compressed air sprayers and hose-end equipment. They are particularly useful for spraying fruit trees.
How do I clean my Hudson sprayer?
To clean, first rinse sprayer thoroughly. Second, remove nozzle. Put about 1 gallon of fresh water in tank, pressurize sprayer and flush water through system. Release tank pressure.
How do you fix a spray bottle that won’t spray?
If your sprayer doesn’t work, it’s either because the nozzle is blocked, the piston seal is damaged or the inner tube isn’t immersed in fluid. Unscrew the nozzle cap by turning it counterclockwise a quarter turn and try spraying it again. If the nozzle was too tight, your sprayer may now be working.
Why is my sprayer losing pressure?
This could be due to a split non-return valve, located at the base of the pump mechanism or perished washers and seals. If no pressure is felt then the sprayer isn’t getting pressure in the first place, so the most probable cause is a faulty, missing or dry plunger O-ring or leaking non return valve.