Where is the serpentine belt on a Pontiac Sunfire?
Without the serpentine belt, the Pontiac Sunfire is literally crippled on the side of the road waiting for a tow truck. Release hood latch and place hood prop in proper location.
How do you remove a serpentine belt from a car?
Pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well.
How is the tension set on a serpentine belt?
Depending on the application, your serpentine belt will either have tension placed on it using a movable bracket or an auto tensioner pulley. This pulley uses an internal spring to apply consistent pressure to the belt at all times. If your vehicle does not have a tensioner pulley, the alternator bracket is likely how tension is set on the belt.
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
Without the serpentine belt, the Pontiac Sunfire is literally crippled on the side of the road waiting for a tow truck. Release hood latch and place hood prop in proper location.
Where do I find the serpentine belt on my car?
To access the serpentine belt, you will need to open the hood of the vehicle. The hood release can usually be found near the door on the driver’s side of the vehicle. With the hood released, you will also need to release the safety latch located at the front of the vehicle.
How can I increase the tension on my serpentine belt?
Increase the tension on the belt. If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt.
What happens if a serpentine belt goes bad?
The serpentine belt in most modern vehicles transfers power from the crank pulley to the various accessories mounted on the engine. A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function.
How do you remove a belt from a SunFire?
Remove belt by placing a 15 millimeter adapter (13 millimeter for 2.4 liter engines, but these are very rare in the Sunfire) into the belt removal tool and placing it on the bolt head located on the center of the tensioner.
What do you need to know about the serpentine belt?
By inspecting your serpentine belt regularly, you can prevent breakdowns or driving mishaps. The serpentine belt controls the alternator, power steering pump, water pump, crankshaft, and with equipped models, the air conditioner compressor.
What kind of belt remover do I Need?
Belt removal tool (recommended and most come with five or six adapters) or; Long-handled 3/8 inch drive ratchet Shallow 15 millimeter socket (for 2.2 liter engine) Shallow 13 millimeter socket (for 2.4 liter engine). Jody L. Campbell spent over 15 years as both a manager and an under-car specialist in the automotive repair industry.
Can a serpentine belt be replaced on a Pontiac Sunfire?
Although it may look like a complex component in the engine, the serpentine belt in a Pontiac Sunfire is not all that difficult to replace provided you have a couple of proper tools. By inspecting your serpentine belt regularly, you can prevent breakdowns or driving mishaps.
Remove belt by placing a 15 millimeter adapter (13 millimeter for 2.4 liter engines, but these are very rare in the Sunfire) into the belt removal tool and placing it on the bolt head located on the center of the tensioner.
By inspecting your serpentine belt regularly, you can prevent breakdowns or driving mishaps. The serpentine belt controls the alternator, power steering pump, water pump, crankshaft, and with equipped models, the air conditioner compressor.
Belt removal tool (recommended and most come with five or six adapters) or; Long-handled 3/8 inch drive ratchet Shallow 15 millimeter socket (for 2.2 liter engine) Shallow 13 millimeter socket (for 2.4 liter engine). Jody L. Campbell spent over 15 years as both a manager and an under-car specialist in the automotive repair industry.