Where is the purge control solenoid?
The canister purge solenoid is an emissions control component that is commonly found on the evaporative emissions (EVAP) system of many modern vehicles.
What is the difference between a purge valve and solenoid?
The Vent Solenoid is a normally open valve that is commanded closed to seal the EVAP system and stop air flow into the charcoal canister. The Purge Solenoid is normally closed but is opened by the PCM to allow manifold vacuum in the EVAP system — thus drawing fuel vapours from the EVAP system.
What causes a canister purge solenoid to go bad?
If the canister, or any of the supply lines, are blocked or have holes, the solenoid cannot function and the purge control valve will remain closed. In addition, the solenoid’s electrical portion can fail, resulting in the valve remaining closed.
Can you drive with a bad purge valve solenoid?
While you can still drive your car with a bad purge valve, you will only expose it to further damage not only to the EVAP system, but as well as to the other parts in your vehicle. The more you drive the vehicle with a bad purge valve, the more you will harm other parts. It is necessary to fix the problem eventually.
Where does the canister purge solenoid come from?
The canister purge solenoid is an emissions control component that is commonly found on the evaporative emissions (EVAP) system of many modern vehicles. Modern vehicles are equipped with an (EVAP) system that works to reduce the evaporative emissions pollution that can come from the vehicle’s fuel, which is released in the form of vapors.
What are the symptoms of a bad purge solenoid?
Usually, a bad purge solenoid will display any of the following 5 symptoms that can alert the driver of a potential problem in need of servicing. 1. Rough Idle One of the first symptoms that a faulty canister purge valve may produce is a rough idle.
What happens if the canister purge valve fails?
If the canister purge valve fails and sticks open, it will create a vacuum leak that can affect the engine idle speed and quality. A vacuum leak can also be created if the purge solenoid, or any of the hoses that may be attached to it break or become damaged.
How to tell if an EVAP purge valve is failing?
Poor Engine Performance On top of a rough idle, a vehicle with a failing EVAP canister purge valve will display signs of poor engine performance. The engine may feel like its running “weak” and won’t generate sufficient power for acceleration. Accelerating will feel like you’re pressing the pedal down and moving slower.