Where is the oil drain plug on a 2002 Heritage Softail?
The oil drain us usually a hose with a plug in it that is held by a clip on the frame. It us usually on the right hand side of the bike just behind and underneath the transmission side cover.
Where is the oil drain plug on a Softail?
Softail models built between 1984 to 1999 are equipped with an Evolution engine, which uses an oil drain hose placed in front of the transmission unit, on the left side of the motorcycle. Softail models built after 2000 are equipped with the newer Twin Cam engine, placing the oil drain plug on a cross-member below the rear of the transmission unit.
How to change the oil in a Harley-Davidson Heritage Softail?
Allow your Heritage Softail’s oil to drain for a minimum of five minutes or until the flow of oil slows to a thin trickle. Clean the drain plug with a shop towel and replace its sealing O-ring with a new O-ring.
What kind of oil does a Harley Davidson use?
Withdraw the dipstick and take note of the oil level in relation to the upper and lower marks cut into the dipstick. If the oil level is below the lower mark, add a small amount of 20W50 motor oil into the oil tank, then recheck the oil level.
What kind of drain plug does a Harley Davidson use?
Adapters are available for some models. (The EZ-102 will fit drain plug size 5/8″-18 UNF) (On some models 2014 & on, use A-102 adapter due to recessed oil pan) EZ Oil Drain Valve : Replaces the standard oil drain plug, making oil changes easier, saving valuable time and expenses.
Which is the easiest oil change for a Harley Davidson?
HARLEY-DAVIDSON – EZ OIL DRAIN VALVES- THE EASIEST OIL CHANGE! EZ Oil Drain Valve : Replaces the standard oil drain plug, making oil changes easier, saving valuable time and expenses. Lift the lever of this nickel plated brass ball valve and give it a quarter turn to open it “with your finger”.
How does an EZ oil drain valve work?
EZ Oil Drain Valve : Replaces the standard oil drain plug, making oil changes easier, saving valuable time and expenses. Lift the lever of this nickel plated brass ball valve and give it a quarter turn to open it “with your finger”. Return the lever to its original position and it locks closed.
Can a drain valve be screwed into an oil pan?
Optional Hose Ends: Hose Ends can be screwed into the valves to allow hose connections and to drain oil away from engines with limited space. Hose Ends may be removed after use. Some oil pans are designed with a recessed drain hole which may prevent the valve from being installed properly.