Where is the fuse box on a 2004 g35?
The fuse box is located behind the cover under the instrument panel.
How many fuses are in an Infiniti G35?
Fuse Box Diagram № Ampere Rating Assignment 1 10 Fuel Injectors, Body Control Module (BCM 2 – Not Used 3 – Not Used 4 – Not Used
How do you reset the power window on an Infiniti G35?
3. Get inside the vehicle and close the door. 4. Press and HOLD the Window Regulator Motor Reset Switch. While holding the Reset Switch, press DOWN and HOLD the Window Switch until the Window is fully opened. 5. Release the Reset Switch. Then, lift UP and HOLD the Window Switch until the Window is fully closed.
What are the parts in the fuse box?
Fuse Box Diagram № Description 1 Pre-Crash Seat Belt Control Unit 2 Air Bag Diagnosis Sensor Unit, Occupant 3 Headlamp Aiming Motor RH/LH, Camera Cont 4 Combination Meter, Back-Up Lamp Relay (A
Where do you find a fuse on a car?
To check a fuse, look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Spare fuses are stored in the passenger compartment fuse box.
Where is the fuse puller on an Infiniti G35?
Open the fuse box cover (open the engine hood and remove the battery cover for under-hood blocks, remove the fuse/fusible link holder cover). Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment.
Where is the fuse located for power windows?
Power Window Fuse Location: Where Is Fuse Located for Power Where is fuse located for power windows? The manual does not indicate. have the same problem? Power windows don’t use a fuse, they use a circuit breaker due to the high draw of the motors.The circuit breaker #47 for this and it is in the smart box or under hood fuse box.
3. Get inside the vehicle and close the door. 4. Press and HOLD the Window Regulator Motor Reset Switch. While holding the Reset Switch, press DOWN and HOLD the Window Switch until the Window is fully opened. 5. Release the Reset Switch. Then, lift UP and HOLD the Window Switch until the Window is fully closed.