Where is the fuse block on a Pontiac Montana?
The instrument panel fuse block is located at the right end of the instrument panel, on the passenger’s side of the vehicle. This fuse block is located in the engine compartment, in front of the windshield washer fluid reservoir.
Where are the fuse panels on a Pontiac Firebird?
In this article, you will find fuse box diagrams of Pontiac Firebird 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and 2002, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
What are the running lamps on a Pontiac Montana?
Daytime Running Lamps (DRL) Control Module, Headlamps and Instrument Panel Dimmer Switch Theft-Deterrent Relay to Headlamps WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
The instrument panel fuse block is located at the right end of the instrument panel, on the passenger’s side of the vehicle. This fuse block is located in the engine compartment, in front of the windshield washer fluid reservoir.
Daytime Running Lamps (DRL) Control Module, Headlamps and Instrument Panel Dimmer Switch Theft-Deterrent Relay to Headlamps WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
How do you repair an interior fuse box?
1. Getting Started – Prepare for the repair 2. Remove Cover – Locate interior fuse box and remove cover 3. Locate Bad Fuse – Find the fuse that is tied to the bad component 4. Remove Fuse – Take out the fuse in question and assess if blown 5. Test Component – Secure the cover and test component 6. More Info.
Where is the spare tire and Jack located in a Pontiac Montana?
Change a flat tire Learn where your spare tire and jack are located before you need it on the side of the road 2008 Chevrolet Uplander LS 3.9L V6 Plug the oil leak If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires’ rubber
Pontiac Montana (2001) – fuse box diagram Year of production: 2001 Instrument Panel Fuse Block The instrument panel fuse block is located at the right end of the instrument panel, on the passenger’s side of the vehicle.
Change a flat tire Learn where your spare tire and jack are located before you need it on the side of the road 2008 Chevrolet Uplander LS 3.9L V6 Plug the oil leak If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires’ rubber
Why is the up switch on my Pontiac Montana not working?
Doing the same test on the up switch with the blue wire did not work. So the switch’s down motion works, but the switch’s up motion does not work. Through several tests we found that the brown female wire was providing power, but the blue wire is not providing power and is not a good ground.
Where does the motor go on a Pontiac Montana?
The motor has two male prongs…the down-motion male prong goes into the brown wire side of the female plug connector, the up-motion male prong goes into the blue wire side of the female plug connector. The motor sits in a plastic plug that does not have a ground.
Why does my instrument cluster on my Pontiac Sunfire not work?
I have a 2005 Pontiac Sunfire with instrument cluster issues, my temperature gauge doesn’t work it is pegged way over hot and my gas gauge work occasionally. The rest of the cluster seems to be fine, now is it my cluster that is bad or the sending units that are bad? I am betting its the cluster for my 05 sunfire as well.
Why are the lights on my instrument cluster not working?
2006 infiniti qx56 – rpm not working, some of the dash lights not lit, when I turn headlights on or day light running lights on the entire instrument cluster goes black. when turned off, the dash is lit (except for the ones that don’t lite at all). do I need a new cluster?
I have a 2005 Pontiac Sunfire with instrument cluster issues, my temperature gauge doesn’t work it is pegged way over hot and my gas gauge work occasionally. The rest of the cluster seems to be fine, now is it my cluster that is bad or the sending units that are bad? I am betting its the cluster for my 05 sunfire as well.
What are the names of the Pontiac warning lights?
Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue). There are over 40 of them, so search carefully! Models examined include G3, G5, G6, G8, Grand Prix, Solstice, Torrent, and Vibe.
2006 infiniti qx56 – rpm not working, some of the dash lights not lit, when I turn headlights on or day light running lights on the entire instrument cluster goes black. when turned off, the dash is lit (except for the ones that don’t lite at all). do I need a new cluster?
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
Where is the PCM on a GM car?
Plug the scan tool’s data cable into the vehicle’s diagnostic data port, located underneath the dashboard on the driver’s side. Turn on the scan tool and allow it to boot up. Follow the on-screen instructions to enter in the vehicle’s specific drivetrain information. Select “PCM” from the scan tool’s main menu.
How to reset a GM Powertrain Control Module?
How to Reset a GM PCM. The powertrain control module (PCM) in General Motors vehicles is the main computer responsible for controlling most of the vehicle’s computerized components including the engine, transmission and drivetrain.
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
Is the ignition switch part of the PCM?
The ignition switch now talks to the body control module (BCM) and it’s the BCM that initiates one of two relays. The second relay, the more important of the two, is controlled by the powertrain control module (PCM).
The instrument panel fuse block is located at the right end of the instrument panel, on the passenger’s side of the vehicle. Pontiac Montana – fuse box – instrument panel.
How does the a / C CLUTCH relay work in a car?
The air conditioning clutch relay transfers power, like a switch, from the interior A/C controls of an automobile to the A/C compressor, engaging the compressor clutch. Checking an A/C clutch relay is a process of eliminating possible connection failures. While performing the checks,…
How can I tell if my Clutch relay is hot?
Check all three wires with the test light; with the engine running, the wires should all be inactive. With the engine running, turn the A/C control or switch to “on” at the dashboard. Check the three wires again. The wire from the controls should show “hot,” but not the ground or the A/C compressor feed.
How to check the clutch on an air conditioner?
How Do I Check an AC Clutch Relay? 1 Locate the Relay. Locate the air conditioner clutch relay by tracing the wire connection from the air conditioner compressor plug-in to the relay. In 2 Check Function. 3 Bypass the Relay.
What to do if your AC clutch fuse fails?
Turn the key on, turn the AC on and see if the fuse still fails. leave it sit for about fifteen to twenty minutes. If it fails then you have a wiring issue to the compressor. If it does not, then the ac compressor clutch is causing the high current draw and the compressor needs to be replaced.
Where are the fuses located in a Pontiac Montana?
The instrument panel fuse block is located at the right end of the instrument panel, on the passenger’s side of the vehicle. This fuse block is located in the engine compartment, in front of the windshield washer fluid reservoir. Circuit Breakers: Front Comfort Controls Hi Blower, and Headlamp Fuses (Instrument Panel): Hazard and Stoplamp
Why is my AC clutch relay not working?
One wire should be “hot,” if not, the relay is not sending power to the A/C compressor. If it is, then the relay is functioning correctly and the A/C clutch is bad. To bypass the relay, plug the A/C back in. Return to the relay.
Check all three wires with the test light; with the engine running, the wires should all be inactive. With the engine running, turn the A/C control or switch to “on” at the dashboard. Check the three wires again. The wire from the controls should show “hot,” but not the ground or the A/C compressor feed.
What does an instrument cluster on a car do?
An instrument clusteris the collection of gauges, dials and lights right above the steering wheel that tell you what’s going on in your vehicle. Generally, your car’s instrument clusterwill last the lifetime of the car and you’ll never have a problem with any of them.
What do you do when your instrument cluster doesn’t work?
Also when you drive the car, the speedometer and the rpm gauge doesn’t move. Everything light wise works. Everything works except the rpm, speedometer, temperature and gas gauge. All fuses and relays are good. I’ve even changed the instrument cluster and the BCM. Still none of the gauges work.
The instrument panel fuse block is located at the right end of the instrument panel, on the passenger’s side of the vehicle. Pontiac Montana – fuse box – instrument panel.
An instrument clusteris the collection of gauges, dials and lights right above the steering wheel that tell you what’s going on in your vehicle. Generally, your car’s instrument clusterwill last the lifetime of the car and you’ll never have a problem with any of them.
Why is my Car Cluster not working on my 1994 Concorde?
I have a 1994 Chrysler Concorde 3.5 and my cluster isn’t working at all. when you crank the car the speedometer jumps just a tiny bit, but if you press the gas pedal the rpm gauge doesn’t move. Also when you drive the car, the speedometer and the rpm gauge doesn’t move. Everything light wise works.