Where is the electric motor on a window?
A window motor is a reversible electric motor powered by a switch. It is usually installed inside the door panel behind the trim. By pressing the window switch, an electric current is sent to the window motor.
How to replace a power window motor with pictures?
How to Replace a Power Window Motor. 1. Remove the interior door panel. Most interior door panels are held in place with plastic interior fasteners. You can remove these fasteners by 2. Gently remove the plastic door cover. Beneath the door panel you will find a thin, translucent layer of …
Is the power window motor the same size as the regulator?
The power window motor is much smaller than the regulator, but should be located close by. In most applications, the bolts securing the motor to the door are the same size as the regulator mounting bolts. Remove them and set them someplace safe as well.
What are the parts of an electric window?
Electric windows are controlled by three main parts; motor, regulator and a control switch which can fail in many ways, some of the more popular failures include non operation (stuck), window loose in its track sitting down in the frame while the motor turns.
How to install a new power window motor?
Installing a New Power Window Motor 1 Slide the new motor and regulator back into place. Insert the power window motor and regulator back into the main service port in the door in exactly the opposite order that you removed them in when disassembling the door.
The power window motor is much smaller than the regulator, but should be located close by. In most applications, the bolts securing the motor to the door are the same size as the regulator mounting bolts. Remove them and set them someplace safe as well.
Where are the bolts on a power window?
Locate the window mounting bolts. Depending on the design of your door, there are a few different places the window mounting bolts may be, but it should be fairly apparent when looking into the door. Look for the bolts attaching the window itself to the mechanism that raises and lowers it.
What’s the best way to replace a power window?
Raise the window up into the door frame. Have your friend raise the window up into the door frame as though you had rolled it up normally. Ask them to hold the window in place until you are able to secure it. Pressing one palm on each side of the glass will allow your friend to hold the window up. Use masking tape to secure the window in place.