Where is the drain plug on a Harley Davidson Softail?
Locate the drain plug between the shocks on the bottom side of the transmission. It’s difficult to see and access, but with a 3/8″ ratchet, 6″-8″ extension, universal joint, and a 5/8″ socket, it can be removed. Place your drain pan underneath the bolt.
How to change transmission fluid in a Harley Davidson Softail?
Use a 7/32″ Allen key or socket to start threading the plug, then switch to the 5/8″ socket. Final torque is 20 ft.-lbs. Figure 6. A small amount of metal shavings on the drain plug magnet is normal. Inspect the fill plug o-ring for damage and replace if necessary.
Where to put hydraulic jack on Harley Davidson Softail?
Slide the jack underneath the middle of the frame. Remember that there’s always a chance of failure when using a hydraulic jack. Use a mechanical jack or add a jack stand for safety. Strap your Softail to the jack to keep it from falling. Depending on your style of jack and body size, it may be easier for you to leave your Softail on the kickstand.
Where is the dipstick on a Harley Davidson Softail?
Some years need to be checked with the bike level while others need to be checked on the kickstand. Like the bike’s position, the position of the dipstick varies as well. For Softails with the dipstick in Figure 7, place the dipstick onto the fill plug opening.
Locate the drain plug between the shocks on the bottom side of the transmission. It’s difficult to see and access, but with a 3/8″ ratchet, 6″-8″ extension, universal joint, and a 5/8″ socket, it can be removed. Place your drain pan underneath the bolt.
Use a 7/32″ Allen key or socket to start threading the plug, then switch to the 5/8″ socket. Final torque is 20 ft.-lbs. Figure 6. A small amount of metal shavings on the drain plug magnet is normal. Inspect the fill plug o-ring for damage and replace if necessary.
When to remove oil plugs on Harley Davidson?
It is of utmost importance to remove the engine oil and transmission oil fill plugs along with the primary derby cover; either before draining the oils or before the drain plugs are reinstalled. This will help to avoid confusion as to whether or not the oil has been replenished before attempting to start the motorcycle.
Slide the jack underneath the middle of the frame. Remember that there’s always a chance of failure when using a hydraulic jack. Use a mechanical jack or add a jack stand for safety. Strap your Softail to the jack to keep it from falling. Depending on your style of jack and body size, it may be easier for you to leave your Softail on the kickstand.