Where is the distributor located on a Honda Accord?
There are many parts needed to complete the energy transfer from the coils to the cylinders. In the Honda Accord, distributors have the following parts: Rotor: The rotor is located inside the distributor cap. This rotating mechanism is connected to the coil via a spring-loaded brush, and it sends the voltage to the plug wires.
Who is responsible for starting a Honda Accord?
When this process works as intended, it starts the engine. The distributor itself is responsible for transferring the high voltage from the ignition coils to the correct cylinders. If distributors are no longer able to withstand this high voltage, engine misfires may start to occur.
Why does my Honda Accord distributor stop working?
Honda Accords are known for their reliability. When these Honda sedans start experiencing engine trouble, however, the ignition system may be responsible. One key component of this system, the distributor, can wreak havoc on Honda Accord performance if it stops working. What is the function of the distributor?
When to change the distributor on a Honda?
The distributor unit is made of a metal bowl, and the bowl contains a central shaft that is driven by the camshaft. So when you suffer from engine misfire, or you fail to start your Honda, or you hear some noise from the engine, or the Check Engine Light is on, it is the time to check and change your distributor. Do wait until it is too late.
Is there a problem with my Honda Accord EX?
Here is what this owner experienced: My 1991 Honda Accord EX has 178,000 miles with little or no problem until now. Driving home the other night it just shut off as though I turned the car off. No sputter no nothing. It cranks and cranks but would not and will not start.
Why does my Honda Accord not get a spark?
There are three primary things that will keep the engine from getting a spark: A bad ignition coil, a bad igniter, and a bad distributor. To check the ignition coil, measure the resistance between the + terminal (black/yellow wire) and the – terminal (white/blue wire) of the coil.
What should ignition resistance be on Honda Accord?
To check the ignition coil, measure the resistance between the + terminal (black/yellow wire) and the – terminal (white/blue wire) of the coil. The resistance should be about 0.6 to 0.8 ohms at 70° F. Then check the resistance between the + terminal (black/yellow wire) and the coil wire terminal. It should be about 12,000 to 19,200 ohms at 70° F.