Where is the battery on a Suzuki C50 Boulevard?
A well-maintained Suzuki C50 Boulevard shouldn’t need a new battery often, but things happen. Unfortunately, the motorcycle’s battery is hidden within the frame with no visible means of access. Armed with a Phillips screwdriver and an Allen wrench, a C50 owner must remove the seats to access the battery.
What should I do if my motorcycle battery wont start?
If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve:
What should the voltage be on a motorcycle battery?
If everything looks ok, next is checking the voltage. You can DIY this or take your battery to a local shop or auto parts store to check it out. You’ll also want to load test the battery with a digital voltmeter, leaving it attached to the motorcycle. The voltage reading should range between 9.5 and 10.5 for about 30 seconds.
A well-maintained Suzuki C50 Boulevard shouldn’t need a new battery often, but things happen. Unfortunately, the motorcycle’s battery is hidden within the frame with no visible means of access. Armed with a Phillips screwdriver and an Allen wrench, a C50 owner must remove the seats to access the battery.
What should the charger voltage be on a Suzuki C90?
It should be above 14.1 volts. Anything less and your charging system is not working properly. You will not feel any drop in performance, there are no warning lights to tell you that the voltage has dropped. You will just end up with a progressively weaker and weaker battery until it dies all together.
What happens if the battery goes flat on a Suzuki C90?
You will just end up with a progressively weaker and weaker battery until it dies all together. The other thing that can happen is the charging system fails completely and then the bike runs entire off of the battery until the battery finally goes flat and it dies all together.
What happens when a Suzuki battery is disconnected?
have the same problem? When the battery is disconnected on a Suzuki that the computer loses all its settings and has to relearn them all again. When the battery is disconnected the computer loses it memory programs and must undergo a relearning process.
How do you remove the battery from a C50?
Armed with a Phillips screwdriver and an Allen wrench, a C50 owner must remove the seats to access the battery. It’s not too difficult, as most people are able to complete the job in less than 15 minutes. Use a 5-mm Allen wrench to remove the bolt holding the passenger seat to the rear fender, hidden under the cushion at the end of the seat.
How do you change a battery on a motorcycle?
Pull the rubber strap off of the battery tray’s hook and lift the battery out of the motorcycle. Place a new YB16B-A1 battery in the battery tray. Pull the rubber strap over the battery and hook it onto the battery tray. Use a Phillips screwdriver to tighten the wire lead bolts onto the battery’s terminals.
Armed with a Phillips screwdriver and an Allen wrench, a C50 owner must remove the seats to access the battery. It’s not too difficult, as most people are able to complete the job in less than 15 minutes. Use a 5-mm Allen wrench to remove the bolt holding the passenger seat to the rear fender, hidden under the cushion at the end of the seat.
Pull the rubber strap off of the battery tray’s hook and lift the battery out of the motorcycle. Place a new YB16B-A1 battery in the battery tray. Pull the rubber strap over the battery and hook it onto the battery tray. Use a Phillips screwdriver to tighten the wire lead bolts onto the battery’s terminals.
How do you replace a yb16b-a1 battery?
Place a new YB16B-A1 battery in the battery tray. Pull the rubber strap over the battery and hook it onto the battery tray. Use a Phillips screwdriver to tighten the wire lead bolts onto the battery’s terminals.