Where does the coolant go in a transmission cooler?
To cool the fluid, it travels through the transmission cooler, where it can be dispersed with the help of the radiator and coolant before returning back to the transmission. If you have a transmission cooler located on the air conditioning condenser, the fluid is cooled with the help of this system instead.
How to tell if your transmission fluid cooler is bad?
Signs of a bad transmission fluid cooler 1 There is an Fluid Leak. One of the first signs you will notice before your oil cooler stops working is leaking oil. 2 Noise While Shifting Through Gears. The oil inside the gearbox is necessary to maintain a healthy working environment for the gears. 3 Hose Damage. 4 Engine Overheats. …
Are there any leaks in the Jeep radiator?
It’s only been that wasy about a week now, but no more leaks. Hope it holds up because that is the route im going.
Is the Trans cooling line leaking at the radiator?
Yes they are leaking at the compression fittings in the engine compartment. I found a guy who made his own fix. He cut the fittings off and reconnected the hoses with regular hose clamps and he said they have been dry for a year now. I can’t find the post anywhere now.
What happens to the coolant in a jeep radiator?
For every additional pound of pressure the coolant’s boiling point increases by 3ºF. General rates of increase are usually 8psi to 15psi. If pressures exceed the rated amount for the cap, the valve will open and release the pressure and possibly coolant as well. This coolant will be highly susceptible to flash boiling.
Why is the radiator fan not working on my Jeep Grand Cherokee?
If your Grand Cherokee has a bad engine temp sensor the radiator fan won’t know to come on, because the ECU won’t know how hot the engine is. You’ll need to locate and test the engine temp sensor. Depending on the model year and engine, the location varies. If it does end up being this sensor, they are very affordable.
How to add coolant to a Jeep Liberty?
Be sure to check your owners manual to determine the correct type of fluid to add – for Jeeps, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.
What kind of antifreeze do you use on a Jeep Wrangler?
^^^The one on the left is HOAT Antifreeze. It is used in the 2012 and prior! The one on the right is OAT Antifreeze. It is used in the 2013 through 2015 models. Do not use the wrong antifreeze, because they are not compatible!!!!!!!! You are best off, to just purchase from your Jeep Dealer.