Where do I mount a fog light on my car?
Install your mounting brackets to the bumper cover with hardware included in the kit, then connect wiring as discussed earlier in the article. A fog light kit will include universal mounting brackets designed to bolt onto the bumper of your vehicle, to the framework underneath the bumper, or on a cross member just behind the grille.
How to install fog lights on a grill?
1 Bumper Mount. Bumper mount lights fit in specifically designed holes and are usually round or rectangular. This style is the way that most fog lights come from the factory. 2 Grill Mount. Larger, usually round. These lights are installed on the front grille or mounted directly behind it. 3 Rack Mount. Round or rectangular lights. …
How do you connect a lumen fog light?
Connect (white) power wires together with the matching (white) power wires from each light. After that, connect them to the Y-shaped (white) power wire thats had the other end of it run inside the vehicle.
Where is the relay wire for a fog light?
Connect one BLACK lead to the vehicle ground and to the relay terminal labeled 86. Connect the YELLOW wire to the yellow switch wire terminal and to the relay terminal labeled 85. Test the operation of the lamps as follows: Re-connect the battery.
How to wire fog lights and driving lights?
For Driving Lights: Turn on the high beam headlamps. Connect the end of the circuit tester to ground (-) and use the tester to locate the headlamp high beam lead.
Where to place a fog lamp on the wall?
For Fog Lamps, adjust them so the top of the light beam is 4 inches (102mm) below the center line mark on the wall. For Driving Lamps, adjust them so the bright spot of the beam pattern is on the centerline mark on the wall.
How do you find the low beam of a fog light?
Locate the low beam or high beam light lead on one headlamp by using a circuit tester. Use the following procedure: For Fog Lights: Turn on the low beam headlamps. Connect the end of the circuit tester to ground (-) and use the tester to locate the headlamp low beam lead.
How tall should a fog lamp be on a car?
Position the vehicle on a flat surface at a distance of 25 feet (7.6 m) from a wall. Measure the distance from the center of the lamp to the ground and mark off the same height on the wall.