Where can I find vintage Honda CB750 parts?
Fine tune your Vintage CB750 parts shopping experience! Choose your bike from the list below, and we’ll only list parts that fit the exact model you choose. Can’t find your model in the list? Let us know!
Can a Honda CB 750 fit in a big bore case?
For the ultimate power hungry: The Honda Bol d’Or / CB 900 F DOHC crank can made fit into the CB 750 case to deliver 69mm stroke (63mm stock). Combined with stock or big bore: Bearings fit, so much for the good news. Rotor and ignition are swapped on the Bol d’Or crank, so you’d best swap them, too. (Need to put an oil seal on the left side).
What kind of engine does a Honda CB 750 have?
Make Model Honda CB 750 Four K2 Year 1972 Engine Four stroke, transverse four cylinder, S Capacity 736 cc / 44.9 cub in. Bore x Stroke 61 х 63 mm
What kind of pistons does a big bore Honda CB 900 use?
Yoshimura had kits for 812cc and 823cc. Some manufacturers used modified Honda CB 350 twin pistons. CB 900 DOHC pistons have 64.5mm and can make fit for 823cc but there is not much left for deep valve pockets, unfortunately. CBX six cylinder pistons have 64.5mm for 823cc, and a nice compression height.
What kind of engine does a Honda CB750 have?
Find out now. HONDA 91-03 CB 750 CB750 NIGHTHAWK ENGINE MOTOR TRANSMISSION RUNNING W/ VIDEO!! Honda CB750, CB 750, Oil Filler Cover, L/H Cover, Came From a 1982 Model. HONDA CB750 1978 CB 750 K CYLINDER HEAD NUTS WASHERS ECT..
For the ultimate power hungry: The Honda Bol d’Or / CB 900 F DOHC crank can made fit into the CB 750 case to deliver 69mm stroke (63mm stock). Combined with stock or big bore: Bearings fit, so much for the good news. Rotor and ignition are swapped on the Bol d’Or crank, so you’d best swap them, too. (Need to put an oil seal on the left side).
Is the serial number on a CB750K the same?
The serial numbers do not match, but are in the same model series. It is not uncommon to find CB750’s which have a replacement engine from a different model year since engines from all of the CB750K models are compatible with all of the frames.
Fine tune your Vintage CB750 parts shopping experience! Choose your bike from the list below, and we’ll only list parts that fit the exact model you choose. Can’t find your model in the list? Let us know!
How to replace handle lock on Honda CB750?
Install the Switch On the bracket and positively connect the coupler. b. Replacement of handle lock Removc the handle lock Case mounting screw With a cross point screw driver and remove the lock case 2. Insert the key into the handle lock and turn counter clockwise approximately 600 and then the handle lock can be removed from the steering stem.
What kind of battery does a Honda CB750 use?
Works great if attached with one bolt and nut where the safety starter switch was originally located (can bypass that switch). Rick’s Electric Brand Lithium Ion Battery Compatible Rectifier-Regulator. Designed with a lower voltage set point to work with lithium ion batteries only.
How big is the regulator on a Honda CB750?
OEM # 31700-333-008 / 31700-323-015 Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier. This has the OEM type ground wiring and Stock Type Plugs. Dimensions 80mm Length, 94mm Width, 27mm Height, Hole Distance 70.0mm Center to Center. May require a custom mounting job.