Where can I find the torque for the axle nut?
Go to TimkenInfo.com and look up your vehicle by the year, make and model. Find the axle position, front or rear, and you will see the torque values for the axle nut. The table may also include the torque for the flange bolt and the wheel studs. Obviously, since the right torque is so important, you need to use your torque wrench for installation.
What should the torque be on a hub assembly?
One of the most common mistakes people make when installing a new hub assembly is improperly torquing the axle nut. Proper torque secures the axle nut and keeps the proper load on the hub assembly. This video will show you where to find the proper torque specs for a Timken hub assembly.
What kind of torque wrench to use on front axle?
The front axle nut is metric. Use a twenty four millimeter socket with a reliable torque wrench. While inspecting the front axle, it is also a good idea to visually inspect your front rim and valve stem condition.
Is it possible for an axle nut to loosen?
It is very unlikely that the axle nut will ever loosen if the axle had previously been installed correctly and the axle nut torqued to spec. However, if it is unknown whether or not the axle nut had been previously assembled by a reliable mechanic, it is even more important to inspect.
How much torque does a front axle nut have?
The factory service manual lists the front axle torque spec as 70 to 75 foot pounds. We would always suggest reaching for the higher number on a larger fastener such as this. The front axle nut is metric. Use a twenty four millimeter socket with a reliable torque wrench.
What happens if your spindle nut is over torque?
It will also leave your spindle nut under or over torque resulting in hub assembly failure. Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life.
Where can I find the torque specification guide?
Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear.
It is very unlikely that the axle nut will ever loosen if the axle had previously been installed correctly and the axle nut torqued to spec. However, if it is unknown whether or not the axle nut had been previously assembled by a reliable mechanic, it is even more important to inspect.
What are the specs on a Honda Magna?
Only) 1-27 Specifications 1-12 Torque Values Emission Control Information Labels 1-30 (U.S.A Only) 1-15 Tools General Safety Carbon Monoxide Used Engine/Transmission Oil If the engine must be running to do some work, make sure the area is well ventilated.
How can I check the torque on my rear axle?
To check the nut torque, use a 36 millimeter socket and set the torque wrench to 95 to 105 foot pounds. You do not need to remove the axle retaining clip. If you do not have access to the correct torque wrench, you should at least take the time to make sure that the axle nut is not loose. Check this component at every service interval.
What are the specs of a Honda Magna?
The seat was kept very low, at 28 inches, with the passenger seat being detachable. The all new frame was complemented by 41mm forks, dual shocks, and a single disc on the front. A drum brake was used on the rear.
How tall is the Honda VF750C Magna V45?
Honda VF 750C Magna V45 Make Model Honda VF 750C Magna V45 Seat Height 757 mm / 29.8 in Dry Weight 228 kg / 502.7 lbs Fuel Capacity 13 Litres / 3.4 US gal Consumption Average 44.5 mpg
What’s the speedometer on a 1982 Honda Magna?
The first generation 1982 V45 Magna had chrome headlight and fenders. The front disc brakes have straight grooves, dual piston calipers, and TRAC anti-dive. The speedometer reads 80 mph. The redline is 10,000 rpm.
Where can I find torque specs for motorcycles?
These are .pdf files containing the torque specs for these bikes taken directly from the factory shop manuals. If anyone has these specs for other makes and models of bikes please contact me to get them added here.
Why is it important to torque the spindle nut?
It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear. Over torque of the axle nut will cause excessive load and cause the bearing to overheat, this is one of the most common causes for failures.
What are torque specifications for front and rear axles?
Torque specification guide Front & rear axle nut torque specifications for FWD, RWD & 4 W/D vehicles One of the most common mistakes during installation is improper torque of the Axle nut. To guarantee the (Bearing, Spindle or Hub) is torqued correctly, follow the manufacture’s installation procedure.
Can a calibrated torque wrench install an axle?
Use a qualified, calibrated torque wrench. Do not use an impact gun to install the axle nut. The impact gun will damage the axle nut. It will also leave your spindle nut under or over torque resulting in hub assembly failure.
How much torque is need on my wheel axle hub nut?
Tighten the axle nut with a socket and torque wrench; torque the axle nut between 15 to 20-ft pounds of torque to preload the axle bearings. Rotate the hub eight to 10 revolutions by hand to fully seat the bearing races. Loosen the axle nut until it is freely loose, then finger-tighten the axle nut.
What is the torque spec for the axle?
The front axle nut torque spec is considerably lower than the rear axle nut. The factory service manual lists the front axle torque spec as 70 to 75 foot pounds . We would always suggest reaching for the higher number on a larger fastener such as this. The front axle nut is metric. Use a twenty four millimeter socket with a reliable torque wrench.
What are the torque specs for front wheel bearing/hub?
Wheel Bearing and Hub Assembly – Front (MPA WH515006) Wheel Hub Assembly Axle Nut Torque Spec: 180 ft-lbs / 244Nm , tighten further to align cotter pin with hole. . Feb 26, 2018 | Dodge Cars & Trucks. 1 Answer.