Where are the fuses on a Jeep Cherokee?

Where are the fuses on a Jeep Cherokee?

Online Manual Jeep > Jeep Cherokee > Jeep Cherokee (XJ) > 1993 > FUSES & CIRCUIT BREAKERS The fuse block is to the left of the steering column, under the instrument panel. Fig. 1: Fuse Panel Identification (1993-95) Courtesy of Chrysler Corp. Rear Window Wiper, Washer. Radio, Cigar Lighter, Dome Lamp (1993) .

What is the ignition switch on a Jeep Cherokee?

Ignition Switch – Back-up Lamps, A/C Relay Coil, Shift Selector, Speed Control, Aux. Cooling Fan Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

Where is the relay panel on a Jeep Cherokee?

The relay panel is to the right of the steering column, under the instrument panel. Fig. 2: Relay Block Identification (1993-95 Models) Courtesy of Chrysler Corp. No additional definition. No additional definition.

Online Manual Jeep > Jeep Cherokee > Jeep Cherokee (XJ) > 1993 > FUSES & CIRCUIT BREAKERS The fuse block is to the left of the steering column, under the instrument panel. Fig. 1: Fuse Panel Identification (1993-95) Courtesy of Chrysler Corp. Rear Window Wiper, Washer. Radio, Cigar Lighter, Dome Lamp (1993) .

Ignition Switch – Back-up Lamps, A/C Relay Coil, Shift Selector, Speed Control, Aux. Cooling Fan Relay Coil WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

The relay panel is to the right of the steering column, under the instrument panel. Fig. 2: Relay Block Identification (1993-95 Models) Courtesy of Chrysler Corp. No additional definition. No additional definition.

Jeep Cherokee (XJ) 1997 – 2001 Fuse & Relay Information FUSE NUMBER FUSE CURRENT RATING CIRCUIT INFORMATION (What the fuse is fo 1 25 Amp Power outlet – Located top left column i 2 25 Amp Cigar lighter 3 10 Amp Left headlamp

How many amps does a Jeep Cherokee have?

Jeep Cherokee (XJ) 1997 – 2001 Fuse & Relay Information 21 15 Amp Horn (s) 22 20 Amp Rear wiper switch & motor 23 10 Amp Right side marker, turn, parking and tai 24 – – – Spare Fuse

Where are the fuses located on a Honda Accord?

Located to the left of #16. Junction / Fuse Block (Located inside kick panel.) (What the fuse is for.) Power outlet – Located top left column in fuse bank. Power mirrors, rear defogger & switch – Located bottom left column in fuse bank. Passenger power lock/window switch – Located top right column in fuse bank.

What does a fuse on a Jeep Cherokee do?

Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Cherokee XJ (1984, 1985, 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.

Where is the fuse box located on a Jeep Wrangler?

Tilt the upper edge of the glove box door upward toward the instrument panel enough to reattach the glove box strap to the door. Rotate glove box door to closed position. Open and close to insure proper installation. Your vehicle is equipped with an electrical power distribution center located in the engine compartment near the battery.

Where is the clutch cycle switch on a jeep WJ?

*EDIT* Attached a picture of the evap canister from the 2001 WJ. You can see the connector on top. It’s located on the passenger side right next to the battery. This isn’t the location on my 2003 Jeep.

What does a fuse do on a Jeep Grand Cherokee?

Fuse box diagram (fuse layout), location, and assignment of fuses and relays Jeep Grand Cherokee (ZJ / ZG) (1996, 1997, 1998). A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.

What are the lights on a Jeep XJ?

Dome Light, Courtesy Lights, Glove Box Light, Cargo Light, Radio Memory, Power Mirrors, Teltak Connector Engine Control (ECU) – Fuel Pump, Injectors, Ignition Coil, Oxygen Sensors, Generator Field, Engine Controller Automatic Transmission Controller (ATCU)

Where is the fuse located on a car?

The fuse panel is on the lower instrument panel just to the left of the steering column. The power distribution center located in the engine compartment near the battery. WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

What are the switches on a Jeep Cherokee?

Instrument Cluster, Radio, Rear Wiper/Washer Switch, A/C Heater Control or Heater Control, Rear Window Defogger Switch, Extended Idle Switch, Front Fog Lamp Switch, Rear Fog Lamp Switch, Transmission Range Indicator Illumination (PRNDL), Transfer Case Switch Illumination

Instrument Cluster, Radio, Rear Wiper/Washer Switch, A/C Heater Control or Heater Control, Rear Window Defogger Switch, Extended Idle Switch, Front Fog Lamp Switch, Rear Fog Lamp Switch, Transmission Range Indicator Illumination (PRNDL), Transfer Case Switch Illumination

Located to the left of #16. Junction / Fuse Block (Located inside kick panel.) (What the fuse is for.) Power outlet – Located top left column in fuse bank. Power mirrors, rear defogger & switch – Located bottom left column in fuse bank. Passenger power lock/window switch – Located top right column in fuse bank.

Fuse C Taped to engine wiring harness, by alternator. Fuse D Taped to engine wiring harness, near power steering switch. Cruise Control Under left side of dash, near brake pedal. Radio Under center of dash, behind radio. On side of fuse block. Under dash, above brake pedal. Elect. Control Unit (ECU) Under dash, above accelerator pedal.

Where are the electrical components in a jeep?

In left rear side of intake manifold. On left side of torque converter clutch. On left side of bellhousing. In master cylinder. In coolant overflow bottle. In oil pan. On front/rear of differential. In power steering pump reservoir. In rear portion of transfer case. On fill plug (M/T) or dipstick (A/T). On bottom of windshield washer reservoir.

Fuse C Taped to engine wiring harness, by alternator. Fuse D Taped to engine wiring harness, near power steering switch. Cruise Control Under left side of dash, near brake pedal. Radio Under center of dash, behind radio. On side of fuse block. Under dash, above brake pedal. Elect. Control Unit (ECU) Under dash, above accelerator pedal.

In left rear side of intake manifold. On left side of torque converter clutch. On left side of bellhousing. In master cylinder. In coolant overflow bottle. In oil pan. On front/rear of differential. In power steering pump reservoir. In rear portion of transfer case. On fill plug (M/T) or dipstick (A/T). On bottom of windshield washer reservoir.

Why did my transmission blow fuse number 5?

This was blowing fuse #5 to the power for the O/2 (oxygen) sensors and not shifting correctly, The tech found unplugging the transmission main harness and both O/2 sensors he could clear the short. We traced and found both sensors shorted to ground internally and the wiring in the transmission had melted as well.

What should you know before changing a fuse?

Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled. Never replace a broken fuse with anything other than a new fuse. Always use a fuse of the same colour. Never change a fuse with another amperage. This can cause damage to the electrical system and fire.

Where is the fuel pump relay located on a car?

The fuel pump relay is an electronic component that is found on virtually all vehicles equipped with an internal combustion engine. It is often found in the fuse box located in the engine bay and functions as the primary electronic switch that controls power to the fuel pump. The fuel pump relay is usually controlled by…

Why does my Jeep Grand Cherokee fuel Gage stop working?

Jeep Grand Cherokee Questions – fuel gage stops working, then starts working agter time. why is this h… – CarGurus fuel gage stops working, then starts working agter time. why is this happening?

Do you need a fuel sender for a Jeep Grand Cherokee?

Needs a fuel sender this model has a (cartridge) type fuel sender /pump and is a bit spendy aftermarket pumps are NOT recommended will cause runablity issues stalling, misfire, check engine light.and the need to be done several times. (No one wants that headache) 3 people found this helpful.

Where are the fuse panels on a Jeep Grand Cherokee?

Here you will find fuse box diagrams of Jeep Grand Cherokee 2005, 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

How big is the fuel pump relay on a Jeep Grand Cherokee?

Fuel Pump Relay, Automatic Shut Down Relay, Powertrain Control Module, Transmission Control Relay (4.7L)

Where is the power distribution center on a Jeep Grand Cherokee?

The Power Distribution Center is located near the battery (left or right depending on the version). How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

When does a Jaguar X-type fuse blow?

A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system. If an electrical device is not working, check whether the respective fuse is blown. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse.

Where are the fuses on a 2004 Jeep Grand Cherokee?

2004 Jeep Grand Cherokee Fuse Diagrams for Junction Box in cabin and Power Distribution Center under hood 10. Radiator fan relay 40A Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period. They include wiring diagrams and technical service bulletins.

What kind of transmission does a Jeep Grand Cherokee have?

44RE: A four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee’s with 5.2L engines. 42RE: A four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

Why does my Jeep Grand Cherokee not shift gears?

For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually. The most common cause of transmission problems is the easiest to fix: check the fluid level in the transmission and restore it to the proper levels.

Is there a problem with my Jeep Grand Cherokee?

Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.

What kind of door lock does a Jeep Cherokee have?

Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37″ Toyo MTs. I will assume you have a 4 door Cherokee.

What’s the problem with my 1998 Jeep Cherokee?

1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.

Why is my passenger door lock not working?

If the passenger door button doesn’t work you will have to dig deeper and figure out where the problem is like 2oldjeeps says. The switch is the most common problem though. The door lock circuit is actually in the passenger door. I have an issue with my 00 XJ where they will work only occasionally and I can hear one of the relays clicking.

Under right side of dash, on evaporator housing. On load level compressor bracket. On center of right front wheelwell. On right front wheelwell. Under dash, behind right kick panel. Behind right headlight, on wheelwell. On right front wheelwell. Taped to wiring harness, above fuse block.

Where is the clutch relay on a Jeep Cherokee?

A/C Clutch Relay On right front wheelwell. Under right side of dash, on evaporator housing. On load level compressor bracket. On center of right front wheelwell. On right front wheelwell.

A/C Clutch Relay On right front wheelwell. Under right side of dash, on evaporator housing. On load level compressor bracket. On center of right front wheelwell. On right front wheelwell. Under dash, behind right kick panel. Behind right headlight, on wheelwell.

Where is the starter relay on a jeep?

On right front wheelwell. Taped to wiring harness, above fuse block. On front of right front wheelwell. Under right side of dash. Under instrument panel, to right of steering column. In tailgate, next to wiper motor. Starter Relay (Graphic 1)

Dome Light, Courtesy Lights, Glove Box Light, Cargo Light, Radio Memory, Power Mirrors, Teltak Connector Engine Control (ECU) – Fuel Pump, Injectors, Ignition Coil, Oxygen Sensors, Generator Field, Engine Controller Automatic Transmission Controller (ATCU)

When did the Jeep Grand Cherokee come out?

In this article, we consider the fourth-generation Jeep Grand Cherokee (WK2), available from 2011 to the present.

What is 5V output on Jeep Wrangler?

The 5v output is power for these: TPS, MAP, speed, crank & cam sensors. A sure sign you have lost that output is when you turn the key to the on position & the gauges do not move. You also lose communication with the OBDII data port & a scanner will not “communicate” & not read.

In this article, we consider the fourth-generation Jeep Grand Cherokee (WK2), available from 2011 to the present.

Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled. Never replace a broken fuse with anything other than a new fuse. Always use a fuse of the same colour. Never change a fuse with another amperage. This can cause damage to the electrical system and fire.

How do you know if a fuse is blown?

If an electrical device is not working, check whether the respective fuse is blown. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Check those fuses first that protect the failed component, but check all the fuses before deciding that a blown fuse is not the cause.

If an electrical device is not working, check whether the respective fuse is blown. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Check those fuses first that protect the failed component, but check all the fuses before deciding that a blown fuse is not the cause.

Is it possible to replace a Jeep Cherokee heater core?

Yep every Jeep XJ Cherokee owner has to face it sooner or later, your on your way someplace in your XJ, it’s kinda cold and your heater just isn’t blowing hot air like it should. In this video I show you what it could possibly be. Also it’s alot easier than replacing a heater core. Loading…

Posted In Q&A